Active filters

Filter by

for battery pack
Gamintojas / Manufacturer
Jungtys / Connections
PCM
Plotis / Width
Įkrovos srovė / Current
Color
GX connector with wires M/F

GX connector with wires M/F

GX/3P
Connectors, high currents. One set.Male and female.The wire is about 5mm thick. inner diameter about 3mmLength of the cable from the charger: one meter.For bicycle battery pack.
In warehouse
€5.98
Insulating paper 65x1000mm...

Insulating paper 65x1000mm (adhesive)

IP65X1000
Width: 65 mmLength: 1000 mmThickness: 0.03mmColor: greenBonding strength: 2.4 kg / cmAdhesion to the metal: 200 g / cmDielectric force: 7,500 voltsInsulation class: 180 ° CStorage conditions: dry place 13 ° C and 30 ° CAdhesive insulating paper. For insulating battery packs from the box.Sold one sheet at a time. 65mm on 1000mmThe photo shows where the...
In warehouse
€0.99
Heat shrink tube with glue...

Heat shrink tube with glue 3,2/1,6mm (blue)

TM3,2M
Heat shrinkable tube with glue- Inside diameter before shrinkage: approximately 3,2 mm- Inner diameter when shrunk: approximately 1,6 mm- Wall thickness: 0.3mm- Color: black - Length: 1 meter- Contraction: 2: 1- Temperature range: -55 ° C to + 135 ° C- Shrinkage temperature:> + 100 ° C- Dielectric properties: 25kV / mm- Approvals: UL 224 / CSA /...
In warehouse
€0.45
PVC tube 37mm (black)

PVC tube 37mm (black)

PVC34J
- Inner diameter before contraction: about 34 mm- Inner diameter after shrinkage: approx. 16 mm- shrinkage ratio: approximately 2: 1- Wall thickness: approximately 0.15 mm- Color: black- Before shrinkage, the tubes are soft and moving- After shrinkage, the tube is stiff / hard- Shrinkage: With a hot air blower.Price one meter.
In warehouse
€0.74
PVC tube 265mm (yellow)

PVC tube 265mm (yellow)

PVC265G
- Inner diameter before contraction: about 265 mm- Inner diameter after shrinkage: approx. 135 mm- shrinkage ratio: approximately 2: 1- Wall thickness: approximately 0.13 mm- Color: yellow- Before shrinkage, the tubes are soft and moving- After shrinkage, the tube is stiff / hard- Shrinkage: With a hot air blower.Price one meter.
In warehouse
€3.36
Welding point 23mm 3mm 0,12mm

Welding point 23mm 3mm 0,12mm

W23/3
Welding point 23x3 / 0.12 Nickel-plated soldering tip welding to batteries and accumulators, dimensions: 23 x 3 x 0.12 mm
In warehouse
€0.08
DC socket 5,5mm/ box

DC socket 5,5mm/ box

W11136
Socket 2.5 mm. Mounting inside the case, isolated circuit with solder joints Standard. Metal connector with thread, nut. Connect + and - contacts.
In warehouse
€1.69
DC plug 2,5mm x 5,5mmx

DC plug 2,5mm x 5,5mmx

W11123
DC plug with cable protector bore 2.5 mm x 5.5 mm shaft length 14 mm
In warehouse
€0.40
XLR 3 pole connector/male

XLR 3 pole connector/male

XLR/M1
XLR 3 pole connector. The XLR plug transmits high-quality signals With screw cap for quick and easy connection. Standardized, precision-fit, plug ensures minimal transmission resistance, high-quality gold-plated contacts The solid body ensures durability
In warehouse
€1.49
Solder wire 1mm,100g

Solder wire 1mm,100g

W40844
Professional Lead-Free Solder, ø 1.0 mm, 100 g content: 0.3 % silver, 0.7 % copper, 96.5 % tin, content of flux core: 2,5 %, melting point 217° C Designed for DIY electrical work, repairing wires, cables, televisions, radios, toys, headphones, electric guitars, XLR microphones, laptops, circuit boards, motherboards and other electronic equipment. 100 g...
In warehouse
€16.87
Welding stripe 3mm 0,15mm

Welding stripe 3mm 0,15mm

WS3/0,15
Electro-plated strip for battery pack welding Price for 1 m.
In warehouse
€0.23 (0.12 Eur per unit)
BMS/PCM for 16S Li-ion cell...

BMS/PCM for 16S Li-ion cell 40Ah

PCM16S40A
BMS / PCM For lithium package 59.2V 40A 16S with balancing circuit Protection against overload of one cell: 4.25 V ± 0.025 V Single cell discharge protection: 2.8 V ± 0.05 V Balancing voltage: 4.2 V ± 0.025 V Maximum continuous charging current: 35A Maximum continuous discharge current: 35A overcurrent protection: 80A ± 5A With 65ºC bimetallic thermal...
In warehouse
€42.50
PCM/BMS for 14S Li-ion cell...

PCM/BMS for 14S Li-ion cell 25Ah

PCM14S25A
Overload, short circuit protection.Unloading, current 25AInstantaneous peak discharge current up to 50ACharging voltage: 58.8 VMaximum charging current: 10AMaximum cell voltage: 4.28 ± 0.05 VOff time: 100 msStart of balancing on (cell): 4.08 ± 0.05 VMinimum voltage on the cell: 2.55 ± 0.08 VDischarge voltage per cell: 2.9 ± 0.1 VBalancing voltage:...
In warehouse
€29.49
PCM/BMS for LiFe 4 cell 40Ah

PCM/BMS for LiFe 4 cell 40Ah

V040298
LiFe 4S 40A Protection Board PCB BMS for 40A 4S 16.8V 40A Lithium Battery Protection Board (With Recovery Function - AUTO Recovery) Continuous discharge 40A, 100mA balancing current Note: This BMS/PSC is an upgraded version.
In warehouse
€5.20
PCM/BMS Li-ion for 7 cell 20Ah

PCM/BMS Li-ion for 7 cell 20Ah

V011947
For 7S cell lithium ion battery balancing: 4.18±0.03 V current: 80 mA (VCELL=4.20V) Overload threshold: 4.3±0.05V Reload time delay: 75ms Discharges: 2.4±0.08 V Discharge delay: 5ms Operating current: 20 A Peak current: 30 A In case of excessive current : disconnect the load. Short circuit protection function: Yes (Disconnect the load can be restored.)...
In warehouse
€13.31
PSM/BMS 5S Ličio 18V 30Ah

PSM/BMS 5S Ličio 18V 30Ah

VHX0037
18V 21V 30A battery protection board. Lithium battery pack protection board PCM/ BMS for power tools. Charging voltage: 21 V / 5-6 A Continuous discharge current: 30 A Over current protection: 50/55/60 A Overcurrent protection delay: 20/25/30 mS Single section, power consumption: 30uA Single section overload detection voltage: 4.18- /4.22V Balancing...
In warehouse
€4.49
18V Li-ion Milwauke M18...

18V Li-ion Milwauke M18 PCM/BMS

PCMMILW1
Milwauke M18 battery pack PCM/BMS Max. Charging current: ≤12A Overload voltage protection: 4.25v Overcharge detection time: 2s Overload voltage protection: 2s Overheat protection: 100 ℃ Restoration of overheating protection: 85 ℃ Total battery rating: 18V Compatible with: For Milwauke only
In warehouse
€11.46
18650 Battery holder 2CS

18650 Battery holder 2CS

LBH2CS
18650 battery holder, 45 degree angle. Interconnects with other 3CS and 4CS sizes. Forms battery package off stability. Price for holder.
In warehouse
€0.29
Hard Mylar insulation...

Hard Mylar insulation 0.43x70x500mm

IM043X70
Width: 70 mmLength: 500 mmThickness: 0,43mmColor blackHas excellent mechanical properties for compression inside battery pack.
In warehouse
€1.39
PVC cover for 18650 cells...

PVC cover for 18650 cells (brown)

PVC18650U
For 18650 cells brown color - Inner diameter before contraction: about 30 mm- Inner diameter after shrinkage: approx. 15 mm- shrinkage ratio: approximately 2: 1- Wall thickness: approximately 0.10 mm- Color: brown- Before shrinkage, the tubes are soft and moving- After shrinkage, the tube is stiff / hard- Shrinkage: With a hot air blower.Price one psc.
In warehouse
€0.08
PVC cover for 18650 cells...

PVC cover for 18650 cells (black)

PVC18650J
For 18650 cells black color - Inner diameter before contraction: about 30 mm- Inner diameter after shrinkage: approx. 15 mm- shrinkage ratio: approximately 2: 1- Wall thickness: approximately 0.10 mm- Color: black- Before shrinkage, the tubes are soft and moving- After shrinkage, the tube is stiff / hard- Shrinkage: With a hot air blower.Price one psc.
In warehouse
€0.08
18650 Battery holder 3CS

18650 Battery holder 3CS

LBH3CS
18650 battery holder, 45 degree angle. Interconnects with other 2CS and 4CS sizes. Forms battery package off stability. Price for holder.
In warehouse
€0.36
18650 Battery holder 4CS

18650 Battery holder 4CS

LBH4CS
18650 battery holder, 45 degree angle. Interconnects with other 3CS and 2CS sizes. Forms battery package off stability. Price for holder.
In warehouse
€0.47
Showing 145-168 of 295 item(s)
Contact welding

Support 24/7

Email: info@baterija.lt

Phone: +370 687 53818

BALTBattery

Siekdami pagerinti Jūsų naršymo kokybę, statistiniais ir rinkodaros tikslais šioje svetainėje naudojame slapukus. Sužinoti daugiau