Lithium chemistry cell balancing with 5mV accuracy. Maximum current 5Ah. Voltage per cell 2.7V-4.5V The capacitor principle moves the charge from higher to lower.
Works on 3S and 4S It is recommended that the battery pack capacity be suitable for a current load of 5Ah.
For every 0.1 V difference, the balancing current reaches 1.5 A
Must connect wires...
Balancing of lead chemistry 24V batteries with a current of 5Ah.The capacitor principle moves the charge from higher to lower.It is recommended that the battery capacity be suitable for a current load of 5Ah.Must connect wires first, correct voltage. Incorrect connection may damage the battery or burn the balance board. Works immediately after connection....
Lithium chemistry cell balancing with 0.03 V accuracy. Maximum current 1.2Ah. Voltage per cell 2.0V-4.5V
The principle of induction moves the charge from lower to higher. Works on 5S (standard for 18V battery pack)
It is recommended that the pack capacity is suitable for a current load of 1.2Ah. For every 0.1 V difference, the balancing current reaches...
Lithium chemistry cell balancing with 0.03 V accuracy. Maximum current 1.2Ah. Voltage per cell 2.0V-4.5VThe principle of induction moves the charge from lower to higher. Runs 10S (standard 42V battery pack)It is recommended that the pack capacity is suitable for a current load of 1.2Ah.For every 0.1 V difference, the balancing current reaches 0.5-0.7...
Users of hearing aids and cochlear implants must have spare batteries that they can use while studying or working.
These specially designed battery holders can hold up to three hearing aid or cochlear implant batteries. Just add the batteries and attach them to the key fob. This will be a backup.
Number of batteries: 3 pcs
Capacity: 675, 312, 13 and 10...
Suitable for lithium batteries with a nominal voltage of 3.7 / 3.6V. Charging voltage 4.2V (including 18650, 26650, polymer lithium batteries, no size restrictions)Charging voltage: 8.4VHas balancing.Maximum discharge current: 20A (if the cooling environment is not good, reduce the use of load current)Continuous charging current: 10AConnect from 0 V, 4.2...
LiFe 4S 40A Protection Board PCB BMS for 40A 4S 16.8V 40A Lithium Battery Protection Board (With Recovery Function - AUTO Recovery)
Continuous discharge 40A,
100mA balancing current
Note: This BMS/PSC is an upgraded version.
The length of the cable is about 26 cm
Attached at the ends of the socket.
During installation, the required distance will need to be cut.
The thickness of the wire is about 4mm A 10Ah fuse is included.
POWER BANK. Mounting plate + indication.
Input: 5V / 3A USB -C: 5V3A 9V / 2A 12V / 1.5A
Output: USB -A: 5V / 3A USB-C: 5V / 3A 9V / 2A 12V / 1.5A + Apple connector
Power: 18 W, if the device is more than 18 W, can not be used can even burn.
Supports: QC3.0 QC2.0: FCP: PE2.0 PE1.1: SFCP
Input / output overvoltage / overcurrent / short circuit protection....
- Inner diameter before contraction: about 265 mm- Inner diameter after shrinkage: approx. 135 mm- shrinkage ratio: approximately 2: 1- Wall thickness: approximately 0.13 mm- Color: yellow- Before shrinkage, the tubes are soft and moving- After shrinkage, the tube is stiff / hard- Shrinkage: With a hot air blower.Price one meter.