- Inner diameter before contraction: about 29 mm- Inner diameter after shrinkage: approx. 14 mm- shrinkage ratio: approximately 2: 1- Wall thickness: approximately 0.10 mm- Color: not color (transparent)- Before shrinkage, the tubes are soft and moving- After shrinkage, the tube is stiff / hard- Shrinkage: With a hot air blower.Price one meter.
- Inner diameter before contraction: about 25 mm- Inner diameter after shrinkage: approx. 16 mm- shrinkage ratio: approximately 2:1- Wall thickness: approximately 0.13 mm- Color: red- Before shrinkage, the tubes are soft and moving- After shrinkage, the tube is stiff / hard- Shrinkage: With a hot air blower.Price one meter.
A ring nozzle is used to connect the cable to the electrical installation elements. The terminal is mounted on the cable by pushing it over the open part of the cable and pressing with a press or pliers. Fastened with a screw of the appropriate diameter. This will reduce the overheating of the conductors and the insulation of the cables by soldering the...
Optional accessories for the HTC charger series (HTC 1000/2000/4000)
The accessories can be connected to the compatible charger using the connector system.
The HTC charging plug for on-board power sockets is intended for quick, easy and safe connection of the battery via the on-board power socket.
Please observe the warning and safety instructions for...
For holding 18650 battery cells.
There is an improvement with PVC insulation. + and - to have one electrical contact. For sides it would only hold, but not shorten, through the battery housing. The colors are different. It will be more convenient to separate the polarities during installation.
Price for two terminals. One pair.
- Inner diameter before contraction: about 45 mm- Inner diameter after shrinkage: approx. 25 mm- shrinkage ratio: approximately 2: 1- Wall thickness: approximately 0.10 mm- Color: transparent- Before shrinkage, the tubes are soft and moving- After shrinkage, the tube is stiff / hard- Shrinkage: With a hot air blower.Price one meter.
- Inner diameter before contraction: about 295 mm- Inner diameter after shrinkage: approx. 147 mm- shrinkage ratio: approximately 2: 1- Wall thickness: approximately 0.13 mm- Color: black- Before shrinkage, the tubes are soft and moving- After shrinkage, the tube is stiff / hard- Shrinkage: With a hot air blower.Price one meter.
- Inner diameter before contraction: about 265 mm- Inner diameter after shrinkage: approx. 135 mm- shrinkage ratio: approximately 2: 1- Wall thickness: approximately 0.13 mm- Color: black- Before shrinkage, the tubes are soft and moving- After shrinkage, the tube is stiff / hard- Shrinkage: With a hot air blower.Price one meter.
- Inner diameter before contraction: about 37 mm- Inner diameter after shrinkage: approx. 18 mm- shrinkage ratio: approximately 2: 1- Wall thickness: approximately 0.15 mm- Color: transparent- Before shrinkage, the tubes are soft and moving- After shrinkage, the tube is stiff / hard- Shrinkage: With a hot air blower.Price one meter.
2.5mm² cable with terminals. Thick and elastic cord. About 20cm long.Connector for: 6.35mm lead battery plus and minus connectors.Can also can give to smaller 4.8mm connectors.PS. the color of the cord may vary.
2.5mm² the cable with terminals. About 20cm long.Connector for: 6.35mm lead battery plus and minus connectors.Also can fit on smaller 4.8mm connectors.PS. the color of the cord may vary.