Battery packs equipment

Active filters

Filter by

for battery pack
Gamintojas / Manufacturer
Jungtys / Connections
PCM
Plotis / Width
Įkrovos srovė / Current
Color
Amass XT60IEM 2pins "male"...

Amass XT60IEM 2pins "male" 35A/65A

XT60IEM
AMASS XT60IE-MConnector Type: MaleDirect current: 35AImpulse current: 60ANumber of connections/disconnections: 1000 timesInternal resistance: 1mΩNominal voltage: 600V DCDegree of insulation: UL94 V0Mounting: with M2.5 x 8mm screws (nuts installed)Certificate: RoHSContact material: gold-plated brassOperating temperature: -20°C to 120°C
In warehouse
€0.85
PCM/BMS 24V Li-ion for 7S...

PCM/BMS 24V Li-ion for 7S cell 40Ah

PCM7S40
PCM/BMS 7S 25.9V 40AhSingle cell discharge protection up to: 2.8V ± 0.1VBalancing voltage for one element: 4.2V±0.05VMaximum continuous charging current: 20AMaximum continuous discharge current: 40APeak current: 120±20APCM/BMS system current consumption: max. 100 µATemperature sensor: power cut at 65ºC or 70ºCShort circuit protectionDimensions: length:...
In warehouse
€24.47
PCM for "power bank" USB-C/3

PCM for "power bank" USB-C/3

LIPCB7V3
POWER BANK. Mounting plate + indication. Input: 5V / 3A USB -C: 5V3A 9V / 2A 12V / 1.5A Output: USB -A: 5V / 3A USB-C: 5V / 3A 9V / 2A 12V / 1.5A + Apple connector Power: 18 W, if the device is more than 18 W, can not be used can even burn. Supports: QC3.0 QC2.0: FCP: PE2.0 PE1.1: SFCP Input / output overvoltage / overcurrent / short circuit protection....
In warehouse
€4.99
Solder wire 1mm,100g

Solder wire 1mm,100g

W40844
Professional Lead-Free Solder, ø 1.0 mm, 100 g content: 0.3 % silver, 0.7 % copper, 96.5 % tin, content of flux core: 2,5 %, melting point 217° C Designed for DIY electrical work, repairing wires, cables, televisions, radios, toys, headphones, electric guitars, XLR microphones, laptops, circuit boards, motherboards and other electronic equipment. 100 g...
In warehouse
€16.87
PCM for "power bank" USB-C

PCM for "power bank" USB-C

VX52136
POWER BANK. Mounting plate + indication. USB - C open board 5V with protection 1Ah Voltage: 4.35-6V (recommended voltage 5V) Charge cut-off voltage: 4.2V +/- 1% Maximum charging current: 1000 ma Battery overcharge protection voltage: 4.28V Battery Recharge Boost Voltage: 4.00V Battery discharge protection voltage: 3.0V Battery end of discharge voltage:...
In warehouse
€1.09
Fuse holder 4x26 with wires

Fuse holder 4x26 with wires

W25503
The length of the cable is about 26 cm Attached at the ends of the socket. During installation, the required distance will need to be cut. The thickness of the wire is about 4mm A 10Ah fuse is included.
In warehouse
€2.30
Super glue 3g

Super glue 3g

W77002
Super glue for use in household, industry, car, hobby or even model making. Perfect for model making with its closable protective cap. Dose the liquid adhesive precisely for components to be fastened. Superglues stick ceramics, metals, plastics, glass, rubber or leather, among other things. Used as plastic glue, porcelain glue, metal glue, glass glue,...
In warehouse
€0.45
18650 cells + & - insulated...
  • On sale!

18650 cells + & - insulated terminals

KEYS18D
For holding  18650 battery cells.  There is an improvement with PVC insulation.  + and - to have one electrical contact.  For sides it would only hold, but not shorten, through the battery housing. The colors are different. It will be more convenient to separate the polarities during installation. Price for two terminals. One pair. 
In warehouse
€1.15
PCM/BMS Li-ion for 7S cell 8Ah
  • On sale!

PCM/BMS Li-ion for 7S cell 8Ah

PCM-L07S8
Protection Circuit Board for 25.9V 7S Li-ion/Li-polymer battery pack;PCB applies for 7cells Li-ion/Li-polymer battery pack;To prevent the battery packs from overcharge,overdischarge,over current, over temperature ,short circuitIn the table rated is voltages: 25,2VMinimum voltage: 17,5VMaximum Voltage: 29,4V
In warehouse
€15.71
PCM/BMS LiFe for 4S cell 30Ah
  • On sale!

PCM/BMS LiFe for 4S cell 30Ah

PCM-L043S25
Connection details in photo.Have cell balancing.In the table rated is voltages: 12,8VMinimum voltage: 10VMaximum Voltage: 14,8V
In warehouse
€16.75
PCM/BMS LiFe for 5S cell 10Ah
  • On sale!

PCM/BMS LiFe for 5S cell 10Ah

L06S083226
Connection details in photo.Have cell balancing after 18VMinimum voltage: 12,5VMaximum Voltage: 18,5V
In warehouse
€13.79
PCM/BMS LiFe for 14S cell 40Ah
  • On sale!

PCM/BMS LiFe for 14S cell 40Ah

L14S4023214
Balance voltage for single cell    3,6V±0.025VCurrent for single cell    110mA±3mALow current consumption for single cell    ≤30μAMaximal discharging current    50A Over charge detection voltage    3,8±0.025VOver charge detection delay time    0.96S~1.4SOver discharge detection voltage    2.5±0.05VOver discharge detection delay time    115~173mSOver...
In warehouse
€33.52
PCM/BMS LiFe for 7S cell 65Ah
  • On sale!

PCM/BMS LiFe for 7S cell 65Ah

L13S653997
Charging voltage     DC:25,2V   3.6V/CellBalance voltage for single cell     3.60±0.025VBalance current for single cell     72±10mALow current consumption for single cell     ≤20μAMaximal continuous discharging current     65AOver charge detection voltage     3.90±0.025VOver charge detection delay time     0.96S~1.4SOver charge release voltage...
In warehouse
€34.61
Kapton 10mm 33m
  • On sale!

Kapton 10mm 33m

KT1033
Width: 10 mmLength: 33 mThickness: 0.03mmColor: AmberAdhesive strength: 5.4 kg / cmMetal adhesion: 200 g / cmDielectric force: 7,500 voltsInsulation class: 180 ° CWide use range: -73 ° C to 260 ° CStorage conditions: dry place at 13 ° C and 30 ° CThis high temperature tape is made of Dupont brand Kapton film and bonded silicon adhesive. The tape is flame...
In warehouse
€1.86
Baterry adapter (holder) AAA

Baterry adapter (holder) AAA

W66747
Car cigarette lighter accessories Cigarette lighter adapter used as torch power supply for 18650 accumulator. Can be switched to 3x AAA/ R3 batteries. 
In warehouse
€0.44
Amass XT60EM 2pins "male"...

Amass XT60EM 2pins "male" 20A/40A

XT60EM
AMASS Model: XT60E-MConnector Type: MaleContinuous current: 20AImpulse current: 40ANumber of connections/disconnections: 1000 timesInternal resistance: 0.60mΩNominal voltage: 500V DCDegree of insulation: UL94 V0Mounting: with M2.5mm screws (nuts installed)Certificate: RoHSContact material: gold-plated brassOperating temperature: -20°C to 120°C
In warehouse
€0.70
Insulating paper 65x1000mm...

Insulating paper 65x1000mm (adhesive)

IP65X1000
Width: 65 mmLength: 1000 mmThickness: 0.03mmColor: greenBonding strength: 2.4 kg / cmAdhesion to the metal: 200 g / cmDielectric force: 7,500 voltsInsulation class: 180 ° CStorage conditions: dry place 13 ° C and 30 ° CAdhesive insulating paper. For insulating battery packs from the box.Sold one sheet at a time. 65mm on 1000mmThe photo shows where the...
In warehouse
€0.99
Battery box for AA /CR123

Battery box for AA /CR123

DAA/123
Battery box for Two psc AA battery. Or 3 psc CR123 type battery. White color. Price for one box. Outer dimensions: 60 mm x 45.5 mm x 21.5 mmInner dimensions: 56.4 mm x 41.5 mm x 19.50 mmMaximum battery length 14500: 56.00 mmMaximum battery length 16340: 38.50 mm
In warehouse
€0.18
18V Li-ion Ryobi komplektas

18V Li-ion Ryobi komplektas

PCMRYOBI
Ryobi battery pack set (without cells) Battery charge protection PCB. Plastic housing, connectors, screws. For 18650 lithium ion cells, 10pcs mounting Max. Charging current: ≤12A Overload voltage protection: 4.25v Overcharge detection time: 2s Overload voltage protection: 2s Overheat protection: 100 ℃ Restoration of overheating protection: 85 ℃ Total...
In warehouse
€15.97
18V for Makita one set

18V for Makita one set

PCMMAKITAZ
Full set for Makita 18V Lithium battery control circuit board Protection chip for electric tools battery, welding tape, screws, plastic holders. Compatible with: For Makita only Its main function to battery are: over charge protection, over discharge protection, short circuit protection, over current protection, reverse charge protection, over heat...
In warehouse
€13.49
Battery box for 18650

Battery box for 18650

D18650N2
Battery box for 18650 battery. Can insert two units. White color. Price for one box.
In warehouse
€0.45
Rayovac battery holder - box

Rayovac battery holder - box

999782
Users of hearing aids and cochlear implants must have spare batteries that they can use while studying or working. These specially designed battery holders can hold up to three hearing aid or cochlear implant batteries. Just add the batteries and attach them to the key fob. This will be a backup. Number of batteries: 3 pcs Capacity: 675, 312, 13 and 10...
In warehouse
€0.97
Showing 1-24 of 303 item(s)
Contact welding

Support 24/7

Email: info@baterija.lt

Phone: +370 687 53818

BALTBattery

Siekdami pagerinti Jūsų naršymo kokybę, statistiniais ir rinkodaros tikslais šioje svetainėje naudojame slapukus. Sužinoti daugiau