Shopping Cart
There are no more items in your cart
PCM/BMS for 10S lithium cells 20Ah
PCM10S/20A
Overload, short circuit protection.Discharge Current: 20AMaximum peak current: 35ACharging voltage: 42VMaximum charging current: 5AMaximum voltage per cell: 4.28 ± 0.05 VMinimum voltage on the cell: 2.55 ± 0.08 VNominal discharge on the cell: 2.9 ± 0.1 VOperating voltage: 150mVStandby discharge: ≤10uASize: 72mm x 44mm x 10mm
Connection:Connect the charge...
In stock
€12.95
Balancing for 5 cells 1,2Ah
HA04
Lithium chemistry cell balancing with 0.03 V accuracy. Maximum current 1.2Ah. Voltage per cell 2.0V-4.5V
The principle of induction moves the charge from lower to higher. Works on 5S (standard for 18V battery pack)
It is recommended that the pack capacity is suitable for a current load of 1.2Ah. For every 0.1 V difference, the balancing current reaches...
In stock
€23.90
PCM/BMS 5S Li-ion 18V 100Ah
PCM5S100
Single battery overcharge protection voltage: 4.21-4.29VSingle battery overcharge protection recovery voltage: 4.14-4.24VOvercharge protection delay: 1.5-2.5SSingle battery overdischarge protection voltage: 2.72-2.88VSingle battery overdischarge protection recovery voltage: 2.9-3.1VOvercharge protection current: 100AOverdischarge protection current:...
In stock
€8.55
PCM/BMS 4S Li-ion 14,4V 100Ah
PCM4S100
Single battery overcharge protection voltage: 3.61-3.69VSingle battery overcharge protection recovery voltage: 3.61-3.69VOvercharge protection delay: 1.5-2.5SSingle battery overdischarge protection voltage: 2.27-2.43VSingle battery overdischarge protection recovery voltage: 2.45-2.65VOvercharge protection current: 100AOverdischarge protection current:...
In stock
€8.55
BMS/PCM for 16S Li-ion cell 40Ah
PCM16S40A
BMS / PCM For lithium package 59.2V 40A 16S with balancing circuit
Protection against overload of one cell: 4.25 V ± 0.025 V
Single cell discharge protection: 2.8 V ± 0.05 V
Balancing voltage: 4.2 V ± 0.025 V
Maximum continuous charging current: 35A
Maximum continuous discharge current: 35A
overcurrent protection: 80A ± 5A
With 65ºC bimetallic thermal...
In stock
€42.00
PCM/BMS for 14S Li-ion cell 25Ah
PCM14S25A
Overload, short circuit protection.Unloading, current 25AInstantaneous peak discharge current up to 50ACharging voltage: 58.8 VMaximum charging current: 10AMaximum cell voltage: 4.28 ± 0.05 VOff time: 100 msStart of balancing on (cell): 4.08 ± 0.05 VMinimum voltage on the cell: 2.55 ± 0.08 VDischarge voltage per cell: 2.9 ± 0.1 VBalancing voltage:...
In stock
€29.40
PCM for 1S Li-ion 18650 2,5Ah (round)
PCM1S2A
In the table rated is voltages: 3,6VMinimum voltage: 2,5VMaximum Voltage: 4,2V
With plasticis box.
In stock
€0.99
PCM for 1S Li-ion cell 12Ah
PCM1S/12A
In the table rated is voltages: 3,6V
Charge/discharge current - 12AhMinimum voltage: 2,5VMaximum Voltage: 4,2V
Dimension: 48x9x2,5mm
Total 90mm
In stock
€1.20
PCM/BMS 18V Li-ion for Milwaukee M18
PCMMILW1
Milwaukee M18 battery pack PCM/BMS
Max. Charging current: ≤12A
Overload voltage protection: 4.25v
Overcharge detection time: 2s
Overload voltage protection: 2s
Overheat protection: 100 ℃
Restoration of overheating protection: 85 ℃
Total battery rating: 18V
Compatible with: For Milwaukee only
In stock
€11.40
Kit for Milwaukee M18 18V
KM/M18
Milwaukee M18 battery pack set (without cells)
Plastic housing, connectors, screws.
In the photo show. Self-assemble the Milwaukee battery pack. No assembly instructions. We recommend, when assembling to a new pack. you need have a new or old sample of the same model.Kit without batteries. Sockets, designed for 18650 size cells.
In stock
€10.00
18V Li-ion Ryobi komplektas
PCMRYOBI
Ryobi battery pack set (without cells)
Battery charge protection PCB.
Plastic housing, connectors, screws.
For 18650 lithium ion cells, 10pcs mounting
Max. Charging current: ≤12A
Overload voltage protection: 4.25v
Overcharge detection time: 2s
Overload voltage protection: 2s
Overheat protection: 100 ℃
Restoration of overheating protection: 85 ℃
Total...
In stock
€15.90
PCM/BMS for 10S Li-ion cell 15Ah
PCM10S15A
This PCM protection module is designed for 10‑series Li‑ion battery packs (10S, 37.0 V system). It provides protection against overcharge, over‑discharge, overload, and short‑circuit conditions, and includes cell balancing circuits to ensure uniform operation of all cells in the pack. Balancing improves overall battery performance, usable capacity, and...
In stock
€11.50
PCM/BMS Li-ion for 3S cell 3Ah
PCM3S3A
Protection Circuit Board for 3S Li-ion/Li-polymer battery pack;PCB applies for 3cells Li-ion/Li-polymer battery pack;To prevent the battery packs from overcharge, overdischarge, over current, over temperature, short circuit.Nominal voltages: 10,8VMinimum voltage: 7,5VMaximum Voltage: 12,6V
In stock
€2.40
PCM for 1S Li-ion cell 5Ah (26650)
PCM1S5A
In the table rated is voltages: 3,6V
Charge/discharge current - 5AhMinimum voltage: 2,5VMaximum Voltage: 4,2V
Dimension: 25,78mm
In stock
€1.10
PCM for 1S Li-ion cell 2,5Ah+ ntc (round)
PCM-L01S3
In the table rated is voltages: 3,6VMinimum voltage: 2,5VMaximum Voltage: 4,2V
With NTC 100kom
In stock
€1.19
PCM/BMS Li-ion for 3S cell 7Ah
PCM3S4A
PCM/BMS module is designed for 3S lithium battery packs (11.1–12.6 V) and provides essential protection functions including overcharge, over‑discharge, over‑current and short‑circuit protection. This is a standard, non‑sealed protection board intended for installation inside battery packs or electronic devices where no moisture exposure is expected.
The...
In stock
€5.90
PCM/BMS Li-ion for 3 cell 15Ah
L04S12406
PCM/BMS module is designed for 3S lithium battery packs (nominal 11.1–12.6 V). It provides essential protection functions including overcharge, over‑discharge, short‑circuit and over‑current protection. The maximum continuous operating current is 15 A, making it suitable for medium‑power battery assemblies and electronic devices.
An integrated NTC...
In stock
€7.30
PCM for 2 Li-ion cell 6Ah
PCM2S6
Protection Circuit Module For 2S Li-ion/Li-Po/ Battery Pack
Voltage Charging voltage CC/CV:Li-ion/Li-po(4.2V/cell);
Balancing current for single cell
Current Current for single cell ≤25μA
Maximal continuous charging and discharging current
(continuous working current) 6A
ver charge detection voltage 3.8-4.4V (can adjust)
Over charge detection delay time...
In stock
€2.49
Sharvin SVC9226 Lithium Nickel Cobalt condensator
SVS9226
SVS9226 Lithium Nickel Cobalt Manganese Oxide condensator
Minimum capacity: 160 mAh
Typical capacity: 180 mAh
Nominal voltage: 3.7V
Charging voltage: 4,2 V
Higher voltage is not recommended.
According to CCCV up to 4,2V standard charging.
Maximum available charging current: 400mA (2C)
Maximum continuous discharge up to : 1000 mA (5C)Discharge cut-off...
In stock
€1.10
Battery for Makita 1822 2000mAh Ni-Cd 18V
H113730
Battery for the tool MAKITAreplaces JR 180DWF, BCS 5621RDWBE, BSS 6343DEFE, BFR 8443DWF, B55574 1822Technical data:Manufacturer: XcellChemistry: Ni-CdVoltage: 18 voltsmAh: 2000 mAhLength: 113 mmWidth: 96 mmHeight: 105 mmNet weight: 830g
In stock
€29.90
Hilti B22 / B22/5.2 Power Tools (4000 mAh, 21.6V)
HILTI/B22
High-performance 4000 mAh Li-Ion replacement battery designed for Hilti 22V power tools. Provides reliable power, extended runtime, and protection against overcharging and short circuits.
Specification:
Capacity / Voltage: 4000 mAh / 21.6 V
Type: Li-Ion
Compatible Devices (Hilti 22V series): AG 125-A22, BX 3-BTG 02, CD 4-A22, SF 4-A22, SF 6-A22, SF...
In stock
€74.00
EXTENSILO Replacement Battery for Makita 18V 2.5Ah (2500mAh) Li-Ion
BL1815/25
High-quality EXTENSILO replacement battery designed for Makita cordless power tools. A reliable 18V Li-Ion battery that offers high performance, a long service life, and an ideal fit.
Direct replacement for original Makita battery models: 194204-5, 194230-4, 194309-1, 197265-04, 194205-3, 197254-9.
Key Features:
Precision Fit: Manufactured to match...
In stock
€35.00
Akyga LIR1454 Li-Ion rechargeable battery, 3.7 V, 93 mAh
LIR1454
Rechargeable Akyga LIR1454 lithium-ion battery designed for compact electronic devices, sensors, memory backup systems and other low-power equipment. Suitable only for devices designed for 3.7 V Li-Ion batteries and the appropriate charging method.
The battery does not include a protection circuit or solder tabs. The LIR1454 must not be used as a direct...
In stock
€3.20
Akyga lithium battery LIR3048 ST 3,7V
LIR3048/ST
Akyga LIR3048 is a rechargeable lithium‑ion (Li‑ion, LiCoO₂) button cell equipped with solder contacts for direct PCB mounting. The metal contacts provide a secure mechanical and electrical connection, making this cell suitable for industrial controllers, RTC modules, compact electronics and applications that require a stable and reliable battery...
In stock
€3.55