- Manufacturer
- Xcell
- Chemistry
- Lithium-ion
- Voltage
- 10.8 V
- Package
- 1 pcs in packing
- PCM protection
- 3 cells
- Current
- 7 A
- For battery packs
- pcm
- Country of origin
- China
PCM/BMS Li-ion for 3S cell 7Ah
PCM/BMS module is designed for 3S lithium battery packs (11.1–12.6 V) and provides essential protection functions including overcharge, over‑discharge, over‑current and short‑circuit protection. This is a standard, non‑sealed protection board intended for installation inside battery packs or electronic devices where no moisture exposure is expected.
The module supports a continuous 7 A charge and discharge current, making it suitable for 3S battery packs up to approximately 7 Ah capacity (or smaller, depending on load requirements). The balancing function operates at 42 ±5 mA, and standby consumption per cell does not exceed 50 μA.
The protection circuit disconnects charging when a cell reaches 4.35 V ±0.025 V, and disconnects discharge when voltage drops to 2.4 V ±0.08 V. Over‑current protection activates at approximately 12 A ±2 A, while short‑circuit protection reacts within 200–500 μs. All protection states recover automatically.
The internal resistance of the module is below 50 mΩ, ensuring minimal losses in operation. Board dimensions: 50 × 16 × 3 mm.
dimension: 50x16mm