Battery packs equipment

Showing 1-30 of 309 item(s)

PCM/BMS 4S Li-ion 14,4V 40Ah

PCM4S40A

For lithium-ion (Li-ION) battery pack, 4 cells. Consistently. 4S with balancing system. Has an external temperature thermistor. If the temperature rises too high, the power is cut off. Voltage difference less than 0.05V, resistance difference less than 5mΩ, capacity difference less than 30mAh. Technical data: Overload protection: 4.25V ± 0.05V Discharge...

€3.200

PCM/BMS Li-ion for 3S cell 25Ah

PCM3S25A

TDT 3S 25A subalansavimu Balansavimo funkcija naudojama kiekvieno akumuliatoriaus elemento įtampai subalansuoti. Įtampos skirtumai gali atsirasti tarp ličio jonų akumuliatorių elementų ir dėl šių skirtumų gali sumažėti akumuliatoriaus veikimas, ir jo naudojimo laikas. BMS stebi įtampų skirtumus tarp elementų ir prireikus atlieka balansavimą. Matmenys:...

€3.990

PCM/BMS for 10S Li-ion cell 30Ah

PCM10S30A

TDT 10S 30Ah balancingThe balancing function is used to balance the voltage of each battery cell.Voltage differences can occur between Li-ion batteries and these differences can lead to a dropbattery performance and reduced usage time.The BMS monitors the voltage differences between the cells and performs balancing if necessary.Charge: 42V-43V Minimum...

€11.500

PCM/BMS for 10S lithium cells 60Ah

PCM10S60A

TDT 10S 60Ah balancingThe balancing function is used to balance the voltage of each battery cell.Voltage differences can occur between Li-ion batteries and these differences can lead to a dropbattery performance and reduced usage time.The BMS monitors the voltage differences between the cells and performs balancing if necessary.Dimensions:...

€22.950

PCM/BMS for 10S lithium cells 100Ah

PCM10S100A

TDT 10S 100Ah balancingThe balancing function is used to balance the voltage of each battery cell.Voltage differences can occur between Li-ion batteries and these differences can lead to a dropbattery performance and reduced usage time.The BMS monitors the voltage differences between the cells and performs balancing if necessary.Dimensions:...

€34.900

PCM/BMS for LiFe 4 cell 50Ah/1200Ah

PCM4S50LI

TDT 4S 50A balancingThe balancing function is used to balance the voltage of each battery cell.Voltage differences can occur between Li-ion batteries and these differences can lead to a dropbattery performance and reduced usage time.The BMS monitors the voltage differences between the cells and performs balancing if necessary.Dimensions: 50x74x8MMCharge:...

€15.950

PCM/BMS Li-ion for 3S cell 80Ah

PCM3S80A

TDT 3S 80A balancing.The balancing function is used to balance the voltage of each battery cell.Voltage differences can occur between cells in lithium-ion batteries, and these differences can reduce battery performance and battery life.The BMS monitors the voltage differences between the cells and performs balancing if necessary.Dimensions:...

€11.970

PCM/BMS for 2S Lithium cells 20Ah

PCM2S20A

TDT 2S 20A balancingThe balancing function is used to balance the voltage of each battery cell.Voltage differences can occur between Li-ion batteries and these differences can reduce battery performance and life.The BMS monitors the voltage differences between the cells and performs balancing if necessary.Dimensions: 55x15x3.5MMCharge: 8.4V-8.5VMinimum...

€3.980

Welding stripe 37mm 0,15mm

WS37/15

Welding tape 37 mm wide, 0.15 mm thick. HILUMIN® Connection when 18mm cells in the package are installed in gaps next to each other. Price for 1 m.

€6.700

Textolite 0,47x83x54mm

5383047

Width: 53 mmLength: 83 mmThickness: 0.47mmColor: yellow Has excellent mechanical properties for izoliation inside battery pack.

€1.250

Insulating adhesive ring 21700/20700

Z21700

Ring diameter: 21 mmInner ring diameter: 12 mmThickness: 0.03mmColor: greenBonding strength: 2.4 kg / cmAdhesion to the metal: 200 g / cmDielectric force: 7,500 voltsInsulation class: 180 ° CStorage conditions: dry place 13 ° C and 30 ° CDesigned to seal 21700 and 20700 and cells between the welding tape and the cell.

€0.060

Battery case with mounting pendant.

W77271

vhbw

Battery case with mounting pendant. A sturdy, padded box for storing batteries or their accessories. The battery box will be an alternative to hard plastic boxes. The outside is covered with beautiful pink artificial leather. The inside of the bag is padded with fire-resistant fabric fibers and hard foam. The zipper allows for a secure closure, so the...

€1.990

PCM/BMS 4S Li-ion 14,4V 15Ah

PCM4S15

Xcell

€11.970

Amass XT60IEM 2pins "male" 35A/65A

XT60IEM

Amass

AMASS XT60IE-MConnector Type: MaleDirect current: 35AImpulse current: 60ANumber of connections/disconnections: 1000 timesInternal resistance: 1mΩNominal voltage: 600V DCDegree of insulation: UL94 V0Mounting: with M2.5 x 8mm screws (nuts installed)Certificate: RoHSContact material: gold-plated brassOperating temperature: -20°C to 120°C

€0.840

Amass XT60EM 2pins "male" 20A/40A

XT60EM

Amass

AMASS Model: XT60E-MConnector Type: MaleContinuous current: 20AImpulse current: 40ANumber of connections/disconnections: 1000 timesInternal resistance: 0.60mΩNominal voltage: 500V DCDegree of insulation: UL94 V0Mounting: with M2.5mm screws (nuts installed)Certificate: RoHSContact material: gold-plated brassOperating temperature: -20°C to 120°C

€0.700

PCM/BMS 24V Li-ion for 7S cell 40Ah

PCM7S40

PCM/BMS 7S 25.9V 40AhSingle cell discharge protection up to: 2.8V ± 0.1VBalancing voltage for one element: 4.2V±0.05VMaximum continuous charging current: 20AMaximum continuous discharge current: 40APeak current: 120±20APCM/BMS system current consumption: max. 100 µATemperature sensor: power cut at 65ºC or 70ºCShort circuit protectionDimensions: length:...

€22.950

PCM/BMS LiFe for 8S cell 100Ah

PCM8S/100A

Life BMS protection with balancing. Nominal voltage: 26,4V Minimum voltage: 20.00V Maximum voltage: 28,8V Charge current: 30Ah Discharge current: 100Ah With cell balancing. Has two thermal controls. With balancing connector. Dimensions: 74mm x 105mm x 8mm

€57.950

PVC tube 129mm (black)

PVC129J

- Inner diameter before contraction: about 129 mm- Inner diameter after shrinkage: approx. 70 mm- shrinkage ratio: approximately 2: 1- Wall thickness: approximately 0.13 mm- Color: black- Before shrinkage, the tubes are soft and moving- After shrinkage, the tube is stiff / hard- Shrinkage: With a hot air blower.Price one meter.

€1.690

PVC copper wire 0,25mm² 1,45mm (black)

L17306

PVC copper wire / LiFY / 0.25 mm²- Conductor: E-Cu strands, bare according to VDE/Kl.6 fine wire (65x0.07 mm)- Core insulation: PVC, YI2, flame retardant, self-extinguishing, ROHS/REACH compliant- Color black- diameter: 1.45mm ±0.05mm- Conductor resistance 1km; Loop: max.79Ohm/km- Rated voltage: max. 24V- Core voltage during test: 500 V (tested by spark...

€0.280

PVC Heat Shrink Tubing (black) 218mm

PVC218

- Inner diameter before contraction: about 218 mm- Inner diameter after shrinkage: approx. 115 mm- shrinkage ratio: approximately 2:1- Wall thickness: approximately 0.13 mm- Color: black- Before shrinkage, the tubes are soft and moving- After shrinkage, the tube is stiff / hard- Shrinkage: With a hot air blower.Price one meter.

€2.050

PCM/BMS Li-ion for 6S cell 30Ah

PCM6S/30A

Protection Circuit Board for 6S Li-ion/Li-polymer battery pack 6S cell PCM/BMS Datasheet 30Ah to the photo. Minimum voltage: 15V Maximum voltage: 25.2V

€8.490

PCM/BMS LiFe for 10S cell 100Ah

PCM10S/100A

Life BMS protection with balancing. Nominal voltage: 33.00V Minimum voltage: 25.00V Maximum voltage: 36.00V Charge current: 30Ah Discharge current: 100Ah With cell balancing. Has two thermal controls. With balancing connector. Dimensions: 74mm x 105mm x 8mm

€39.950

PCM for 1S Li-ion cell 6Ah

VXZ001

Xcell

In the table rated is voltages: 3,6V Charge/discharge current - 6AhMinimum voltage: 2,5VMaximum Voltage: 4,2V Dimensions: 19x4x2.5mm The length of the welding tape is 30mm and 40mm Total length: 95mm

€0.580

PCM/BMS for 10S lithium cells 20Ah

PCM10S/20A

Overload, short circuit protection.Discharge Current: 20AMaximum peak current: 35ACharging voltage: 42VMaximum charging current: 5AMaximum voltage per cell: 4.28 ± 0.05 VMinimum voltage on the cell: 2.55 ± 0.08 VNominal discharge on the cell: 2.9 ± 0.1 VOperating voltage: 150mVStandby discharge: ≤10uASize: 72mm x 44mm x 10mm Connection:Connect the charge...

€12.950

Silicone wire 3,1mm / 2,5mm² (red)

N55048

Silicone cable, very flexible and elastic, high quality Technical data:Silicone insulated multi-core flexible copper cable PVCwire thickness 3.1mmcross section: 2.5 mm2 = 651x 0.07 mm2max voltage: 48Vcurrent: 31.9Amax current / 5min: 55ARed colorGermany Price 1 meter.

€1.850

Silicone wire 3,1mm 2,5mm² (black)

N55049

€1.880

Contacts JST ACHR 3pin

JST/ACHR3

JST ACHR-3 with AWG30 wire (3PIN) A plug used to connect cells for balancing in battery packs. JST three-pin plug with wires ACHR-3 AWG30 Red/Yellow/Black (3 PIN) cable length: 150 mm Maximum voltage: 500 V AC (one minute) Maximum temperature: 85°C wire cross-section: 0.0503mm2 Attention! Check the correct polarity of the connector before use. because...

€1.450

Jungtis JST HSZ 3 pin

HSZ/03

HSZ-03 AWG26/10 Black/White/Red Wires (3PIN) plug with 3 wires HSZ-03 cable type: AWG26/10 length [mm]: 100 maximum voltage: 300V maximum temperature: 105°C wire color: red, black and white cross section 0.129 mm2 The price is for a plug with 3 wires Attention! Check the correct polarity of the connector before use. because different manufacturers...

€1.490

PCM/BMS for 48V 13S Li-ion pack 40Ah

PCM13S40

Discharge current 40A Instantaneous peak discharge current up to 60A Charging voltage: 54.6V Maximum charging current: 40A Maximum cell voltage: 4.28 ± 0.05 V Shutdown time: 100 ms Balancing start from (on cell) : 4.08 ± 0.05 V Minimum voltage on cells: 2.55 ± 0.08 V Discharge voltage per cell: 2.9 ± 0.1 V Balancing voltage: 150mV Standby current :...

€35.950

Battery box for AA /CR123

DAA/123

vhbw

Battery box for Two psc AA battery. Or 3 psc CR123 type battery. White color. Price for one box. Outer dimensions: 60 mm x 45.5 mm x 21.5 mmInner dimensions: 56.4 mm x 41.5 mm x 19.50 mmMaximum battery length 14500: 56.00 mmMaximum battery length 16340: 38.50 mm

€0.170

Contact welding

Support 24/7

Email: info@baterija.lt

Phone: +370 687 53818

BALTBattery

Baterijų paketų testavimas

www.baltbattery.lt