PCM for 1S Li-ion cell 12Ah

Name: PCM for 1S Li-ion cell 12Ah
Brand: Xcell
SKU: PCM1S/12A
Price: 0.64 EUR
Availability: InStock

€0.640

Tax included

In the table rated is voltages: 3,6V

Charge/discharge current - 12Ah
Minimum voltage: 2,5V
Maximum Voltage: 4,2V

Dimension: 48x9x2,5mm

Total 90mm

Techniniai duomenys

Chemija / Chemistry: Li-polimer
Lithium
Gamintojas / Manufacturer: Xcell
Įtampa / Voltage: 3.6V
Pakuotė / Package: bulk
PCM: for 1 cells
Įkrovos srovė / Current: 12Ah
Pagaminimo šalis / Country of origin: China
for battery pack: pcm

Reference PCM1S/12A

In stock 19 Items

Customers who bought this product also bought:

Battery packs equipment

PVC tube 265mm (yellow)

PVC265G

€3.350

- Inner diameter before contraction: about 265 mm- Inner diameter after shrinkage: approx. 135 mm- shrinkage ratio: approximately 2: 1- Wall thickness: approximately 0.13 mm- Color: yellow- Before shrinkage, the tubes are soft and moving- After shrinkage, the tube is stiff / hard- Shrinkage: With a hot air blower.Price one meter.

Battery packs equipment

Silicone wire 1,5mm 0,5mm² (black&red)

N16893

€0.990

Silicone cable, very flexible and elastic, high quality Because wires more used in pairs. Two wire harness for sale.Specification:cross-section: 0.5 mm2 = 140x0.05 mm2 1.5 - 1.37mm wire thickness. compressed decreases to 1.2mm max. voltage: 48V current: 4.5A max. current / 5min: 15.4ATemperature range: -50 ° C to + 135 ° CPrice 1...

Battery packs equipment

PVC tube 37 mm (blue)

PVC37M

€0.430

- Inner diameter before contraction: about 37 mm- Inner diameter after shrinkage: approx. 18 mm- shrinkage ratio: approximately 2: 1- Wall thickness: approximately 0.10 mm- Color: blue- Before shrinkage, the tubes are soft and moving- After shrinkage, the tube is stiff / hard- Shrinkage: With a hot air blower.Price one meter.

On sale!

Battery packs equipment

PCM/BMS Li-ion for 3S cell 3Ah

PCM3S3A

€2.400

Protection Circuit Board for 3S Li-ion/Li-polymer battery pack;PCB applies for 3cells Li-ion/Li-polymer battery pack;To prevent the battery packs from overcharge, overdischarge, over current, over temperature, short circuit.Nominal voltages: 10,8VMinimum voltage: 7,5VMaximum Voltage: 12,6V

Accumulators

Samsung INR18650-35E 3400mAh 10psc

Samsung

INR18650-35E/10

€28.000

Price for one set. 10 pieces accumulators. High capacity battery. Normal charge 1.7Ah Maximum charge current: 2Ah Cyclic discharge: 1Ah Maximum discharge cyclic operation up to: 8Ah Non-cyclic operation up to: 13Ah Production time: Rank-A Dec 04 2023 PS. The photo is similar. Cell code: NC4T

On sale!

Battery packs equipment

Kapton 10mm 33m

KT1033

€1.850

Width: 10 mmLength: 33 mThickness: 0.03mmColor: AmberAdhesive strength: 5.4 kg / cmMetal adhesion: 200 g / cmDielectric force: 7,500 voltsInsulation class: 180 ° CWide use range: -73 ° C to 260 ° CStorage conditions: dry place at 13 ° C and 30 ° CThis high temperature tape is made of Dupont brand Kapton film and bonded silicon adhesive. The tape is flame...

Battery packs equipment

Hard Mylar insulation 0.43x70x500mm

IM043X70

€1.390

Width: 70 mmLength: 500 mmThickness: 0,43mmColor blackHas excellent mechanical properties for compression inside battery pack.

Battery packs equipment

PVC Heat Shrink Tubing (black) 80mm

PVC80/J

€1.160

- Inner diameter before contraction: about 80 mm- Inner diameter after shrinkage: approx. 40 mm- shrinkage ratio: approximately 2:1- Wall thickness: approximately 0.13 mm- Color: black- Before shrinkage, the tubes are soft and moving- After shrinkage, the tube is stiff / hard- Shrinkage: With a hot air blower.Price one meter.

Battery packs equipment

Insulating paper 65x1000mm (adhesive)

IP65X1000

€0.990

Width: 65 mmLength: 1000 mmThickness: 0.03mmColor: greenBonding strength: 2.4 kg / cmAdhesion to the metal: 200 g / cmDielectric force: 7,500 voltsInsulation class: 180 ° CStorage conditions: dry place 13 ° C and 30 ° CAdhesive insulating paper. For insulating battery packs from the box.Sold one sheet at a time. 65mm on 1000mmThe photo shows where the...

Battery packs equipment

PVC tube 295mm (black)

PVC295J

€3.800

- Inner diameter before contraction: about 295 mm- Inner diameter after shrinkage: approx. 147 mm- shrinkage ratio: approximately 2: 1- Wall thickness: approximately 0.13 mm- Color: black- Before shrinkage, the tubes are soft and moving- After shrinkage, the tube is stiff / hard- Shrinkage: With a hot air blower.Price one meter.

PCM for 1S Li-ion cell 12Ah

Li-ion charger 1S cell 4,2V 1Ah

PCM for 1S Li-ion cell 2,5Ah+ ntc...

PCM for 1S Li-ion cell 5Ah (26650)

PCM for 1S Li-ion cell 5Ah

PCM for 1S Li-ion 18650 2,5Ah (round)

Techniniai duomenys

Li-ion charger 1S cell 4,2V 1Ah

PCM for 1S Li-ion cell 2,5Ah+ ntc (round)

PCM for 1S Li-ion cell 5Ah (26650)

PCM for 1S Li-ion cell 5Ah

PCM for 1S Li-ion 18650 2,5Ah (round)

Customers who bought this product also bought:

PVC tube 265mm (yellow)

Silicone wire 1,5mm 0,5mm² (black&red)

PVC tube 37 mm (blue)

PCM/BMS Li-ion for 3S cell 3Ah

Samsung INR18650-35E 3400mAh 10psc

Kapton 10mm 33m

Hard Mylar insulation 0.43x70x500mm

PVC Heat Shrink Tubing (black) 80mm

Insulating paper 65x1000mm (adhesive)

PVC tube 295mm (black)