Best sellers

Dyson battery (vhbw) V8, SV10, SV12, 21,6 V 4000 mAh

DCV8/5
EXTENSILO 21.6 V 4000 mAh Li‑Ion battery is a reliable replacement for original Dyson V8 series power packs, designed to restore full operating time and performance. Built with high‑quality lithium‑ion cells, it provides stable voltage output, low self‑discharge and is completely free from memory effect. This allows the battery to be recharged at any time...
In stock
€79.50

Battery pack Ni-MH 2/3AA 3.6V 750mAh

AB2/3AA750
Ni-MH 2/3AA 3.6 V 750 mAh battery pack. Series connection. Battery pack made of GP Batteries cells. Leads: red and black wires, about 6 cm long. The connection contacts are additionally insulated with Kapton tape. Wrapped in PVC (sleeve colour may vary). If needed, we can weld the wires with connectors you require to the pack, and we can use cells of a...
In stock
€6.45

Battery pack Ni-Mh AA 1800mAh 3,6V (H)

AB3AA180
Ni-Mh battery pack AA 3.6V 1800mAh Battery pack from GP cells. With the wires.  With red and black wire (length about 8cm) The connection contacts are additionally insulated with capton tape. Coated with  PCV (shell color may vary).If necessary, we can montage off the wires connectors.  Use cells of different capacity or dimensions for the package. For...
In stock
€6.00

Ni-Mh Battery pack AAA 3,6V 700mAh

ABAAA3
GP- battery AAA 3,6V 700mAhNi-Mh battery pack with output wires length about 8cm. Coated with transparent PCV (shell color may vary).If necessary, we can weld the wires you need with terminals to the cell. Use cells of different capacity or dimensions for the package. For additional services - contact us.
In stock
€5.99

Akyga Li-polymer battery (403035) 400 mAh

RLP403035
Li-on polymer battery cell.With PCM and connectors3,7 V / 400mAh.Dimensions: 4mm / 30mm / 35mmAkyga Li-polymer battery (403035) 400 mAh 3.7 VAkyga Li-polymer battery 3.7 V – stable capacity400 mAh lithium polymer 403035 battery with protection circuit and connector. Suitable for sensors and portable devices
In stock
€2.65

Varta CR1/2AA 3V Lithium Battery (14250)

CR1/2AASLF
Varta CR1/2AA is a high-quality primary lithium battery designed for professional electronics, measuring instruments, alarm systems, memory backup applications and industrial equipment. Lithium technology provides low self-discharge, long service life and stable performance over a wide temperature range. Its compact size and high energy density make it a...
In stock
€4.70

Varta 16701 LED Flashlight with Battery

216701
Compact and reliable Varta 16701 LED flashlight designed for everyday use at home, in the car, during travel, camping and maintenance work. The flashlight features a bright 5 mm white LED providing an improved and focused light beam. The durable housing is water-resistant according to IPX4 standards and tested for drops from heights up to 9 meters. A...
In stock
€5.00

FDK lithium battery CR17335SE (2 pins)

CR17335SE/2P
FDK CR17335SE Industrial lithium battery. CR-2/3A, 2/3AF. Two solder pins. Plus and minus – one solder pin each, for PCB soldering. Lithium battery FDK CR17335SE (3 V, 1800 mAh, 2/3A). FDK CR17335SE is a high-capacity 3 V lithium battery made in Japan. This cell features a very wide operating temperature range and very low self-discharge, making it ideal...
In stock
€4.50

Varta battery CR2032 3PCBD contacts

202032PCBD
VARTA battery CR2032 Lithium battery with 3 solder contacts. P.S. Please make sure first. The spacing of the connection points is different. Technical specifications (manufacturer): Manufacturer: VARTA Model: CR2032 Electrochemical system: lithium manganese dioxide (Li-MnO₂) Voltage: 3 V Capacity: 230 mAh Diameter: 20.0 mm Height: 3.2 mm Terminals: 3...
In stock
€1.10

Akyga Li‑polimer 703048 1000mAh 3,7V

RLP703048
Li‑polymer battery (703048) 1000 mAh 3.7 V is a flat rectangular cell designed for compact devices requiring a stable 3.7 V nominal voltage and moderate capacity. With typical dimensions of approximately 7.0 × 30 × 48 mm, it is commonly used in portable electronics, toys, GPS trackers, audio devices, controllers, and custom battery packs. The cell uses...
In stock
€6.50

PVC tube 53 mm (for AAA/LR3)

PVC53
- Inner diameter before contraction: about 53 mm- Inner diameter after shrinkage: approx. 27 mm- shrinkage ratio: approximately 2: 1- Wall thickness: approximately 0.08 mm- Color: transparent- Before shrinkage, the tubes are soft and moving- After shrinkage, the tube is stiff / hard- Shrinkage: With a hot air blower.Price one meter.
In stock
€0.54

PVC tube 58 mm (for AAA/LR3)

PVC58
- Inner diameter before contraction: about 58 mm- Inner diameter after shrinkage: approx. 28 mm- shrinkage ratio: approximately 2: 1- Wall thickness: approximately 0.08 mm- Color: transparent- Before shrinkage, the tubes are soft and moving- After shrinkage, the tube is stiff / hard- Shrinkage: With a hot air blower.Price one meter.
In stock
€0.54

Varta 18631 Outdoor Sports Ultralight H30R

218631
Varta Outdoor Sports Ultralight H30R (18631) – an extremely lightweight (only 50 g) rechargeable headlamp for running, hiking and work. Swivelling head, dimmable brightness, and the separable mounting clip lets you use it as a clip light too. The built-in Li-polymer battery (up to 500 charges) is charged with the micro USB cable (1 m, included); the...
In stock
€28.40

Traxxas Connector TRX plug "male" & "female"

TRX1
Traxxas TRX connector set designed for battery packs, RC models, chargers and other higher-power applications. The set includes one male and one female connector. TRX connectors feature low contact resistance, secure mechanical locking and excellent vibration resistance. Their robust design makes them widely used in RC cars, boats, drones and other hobby...
In stock
€7.00

3x AAA Battery Holder with Switch and Loose Wire Ends

W48143
Practical 3xAAA battery holder with integrated on/off switch and loose wire ends designed for electronic projects, LED lighting, toys, DIY applications, and battery-powered equipment. The holder is suitable for three AAA (Micro) batteries. The water-repellent plastic housing helps protect the batteries from moisture and environmental exposure. The...
In stock
€0.95

Heat Shrink Tubing 6.4 mm / 3.2 mm Red

TM6,4R
High-quality thin-wall heat shrink tubing designed for insulating and protecting wires, connectors, solder joints and cable assemblies. Manufactured from flexible polyolefin, the tubing provides excellent electrical insulation, chemical resistance and mechanical protection. After shrinking it remains flexible and tightly conforms to the insulated...
In stock
€0.60

Silicone wire 6mm 8mm² (red)

N30084-2
Silicone cable, very flexible and elastic, high qualitySpecification:- Species "NEG"- Cord: Cu blk (2079x0.07mm) max. thickness: 4,2mmØ- Insulation: silicone (5.7 + 0.1 / -0.3) mm max. thickness: 6mmØ- Resistance at 20 ° C: max. 2.45 ohms / y- Test voltage (Ueff): 2.5 kV AC (Economy test)- Operating voltage (U0 / U): 300/500 V ac- Bending radius: 7.5xD...
Available to order
€4.50

AMASS XT90I-M Male Connector with Signal Contacts

XT90I-M
AMASS XT90I-M is a professional high-current connector designed for battery packs, RC models, electric bicycles, electric motorcycles, chargers, ESC controllers and measuring equipment. The connector is rated for 40 A continuous and 90 A peak current. In addition to the main power contacts, it features two integrated signal contacts for transmitting...
In stock
€1.00

Amass XT90i 2pins + 2pins "female"

XT90I-F
Female XT90Female connector with shield wiring harness. The wires will be protected from moisture.+ And - can be joined by 2 extra points (for data)
In stock
€1.70
Product added to wishlist
Product added to compare.

To ensure you have the best browsing experience, this website uses cookies. You can withdraw your consent at any time by changing your browser settings and deleting stored cookies.