Battery packs equipment Amass EST 80/120A M+F Amass EST80K €7.180 Connectors. High currents. Airtight.80A / 120A Amass EST400VWidth: 29.7 mmHeight: 13 mmLength: 60 mmWeight (g): 38.00Female and Male connector with jumper shields. Add to cart
Battery packs equipment Amass XT60 2 pins "female" Amass XT60I-F €0.790 Female Female XT60Plus and minus / mid-ground "ground"With cable protection for extra protection. Add to cart
Battery packs equipment Amass XT60 2 pins "male" Amass XT60IPW €0.840 Male XT60Plus and minus / mid-ground "ground"Can be soldered to the boardSoldering Add to cart
Battery packs equipment Amass EST PANEL 80/120A M&F Amass AMASSP €8.500 Connector set EST PANEL 80A / 120A plug + socket with panel Connection to the connection panel - high-current connection with the mounting and cable shield. EST 80 / 120A For heavy loads. The socket is well attached and stable in a variety of harsh working conditions. The advantage of the joint is that it provides good insulation and protection... Add to cart
Battery packs equipment Amass SH3,5 male &female Amass SH3,5/FM €0.390 Female and Male Sh 3,5mm connectorConnector with shield wiring harness. The wires will be protected from moisture. Add to cart
Battery packs equipment Insulating adhesive ring (18650) 50psc Z18650/P50 €1.800 Ring diameter: 18 mmInner ring diameter: 9 mmThickness: 0.03mmColor: greenBonding strength: 2.4 kg / cmAdhesion to the metal: 200 g / cmDielectric force: 7,500 voltsInsulation class: 180 ° CStorage conditions: dry place 13 ° C and 30 ° CDesigned to seal 18650 cells between the welding tape and the cell.Sold one sheet at a time. 40 pieces.The photo shows... Add to cart
Battery packs equipment Amass XT150 F & M (red) Amass XT150R €1.050 Amass XT150 one connector male and female. Red color. Add to cart
Battery packs equipment PCM/BMS Li-ion for 3 cell 12Ah L04S12406 €6.950 Protection Circuit Board for 3S Li-ion/Li-polymer battery pack;PCB applies for 3cells Li-ion/Li-polymer battery pack;To prevent the battery packs from overcharge,overdischarge,over current, over temperature ,short circuitIn the table rated is voltages: 10,8VMinimum voltage: 12,6VMaximum Voltage: 7,5V can working with 4cells too. Add to cart
Battery packs equipment PVC Heat Shrink Tubing (white) 123mm PVC123B €1.600 - Inner diameter before contraction: about 125 mm- Inner diameter after shrinkage: approx. 63 mm- shrinkage ratio: approximately 2:1- Wall thickness: approximately 0.13 mm- Color: white- Before shrinkage, the tubes are soft and moving- After shrinkage, the tube is stiff / hard- Shrinkage: With a hot air blower.Price one meter. Add to cart
Battery packs equipment Silicone wire 1,5mm 0,5mm² (black&red) N16893 €0.990 Silicone cable, very flexible and elastic, high quality Because wires more used in pairs. Two wire harness for sale.Specification:cross-section: 0.5 mm2 = 140x0.05 mm2 1.5 - 1.37mm wire thickness. compressed decreases to 1.2mm max. voltage: 48V current: 4.5A max. current / 5min: 15.4ATemperature range: -50 ° C to + 135 ° CPrice 1... Add to cart
On sale! Battery packs equipment PCM/BMS Li-ion for 3S cell 3Ah PCM3S3A €2.400 Protection Circuit Board for 3S Li-ion/Li-polymer battery pack;PCB applies for 3cells Li-ion/Li-polymer battery pack;To prevent the battery packs from overcharge, overdischarge, over current, over temperature, short circuit.Nominal voltages: 10,8VMinimum voltage: 7,5VMaximum Voltage: 12,6V Add to cart
Battery packs equipment PVC tube 195mm (black) PVC195J €2.200 - Inner diameter before contraction: about 185 mm- Inner diameter after shrinkage: approx. 90 mm- shrinkage ratio: approximately 2: 1- Wall thickness: approximately 0.13 mm- Color: black- Before shrinkage, the tubes are soft and moving- After shrinkage, the tube is stiff / hard- Shrinkage: With a hot air blower.Price one meter. Add to cart
Battery packs equipment Kapton 20mm 33m KT2033 €5.250 Width: 20 mmLength: 33 mThickness: 0.03mmColor: AmberAdhesive strength: 5.4 kg / cmMetal adhesion: 200 g / cmDielectric force: 7,500 voltsInsulation class: 180 ° CWide use range: -73 ° C to 260 ° CStorage conditions: dry place at 13 ° C and 30 ° CThis high temperature tape is made of Dupont brand Kapton film and bonded silicon adhesive. The tape is flame... Add to cart