Home

Duracell Plus 150% Extra Life power Boost LR6 4 pcs

9P4006/4B
150% Extra life POWER BOOST  Duracell Power Boost AA (LR6/1500) Nominal voltage: 1.5VImpedance: 65mOms @ 1 kHz Typical weight: 25g Typical volume: (8.4\;cm^{3}\) (\(0.5\;in^{3}\))Operating temperature range: -20 to + 54Designation: ANSI: 15A IEC: LR6
In stock
€3.50
0.875 € vnt

Energizer lithium battery CR2025 (2psc)

402025/2
Energizer CR2025 is a high‑quality lithium coin cell designed for low‑power devices that require long‑lasting and stable performance. With a nominal voltage of 3 V, this battery ensures reliable operation in both everyday and professional equipment. Its construction provides very low self‑discharge, allowing the battery to retain energy even during long...
In stock
€1.20
0.600 € vnt

Scanreco 590,970 ... 7,2V 3Ah

888200507
Device modelsScanreco 590Scanreco 592Scanreco 790Scanreco 960Scanreco RC400Scanreco RC590Scanreco RC960Replaces the following original accessoriesScanreco 13445Scanreco 16131Scanreco 17162Scanreco RSC7220Scanreco 16131Scanreco 17162Scanreco RSC7220
In stock
€39.90

3 psc Hiab XS drive 2000 mAh 7.2 V 14,4 W

GP212201/3
Price for 3 psc. Crane remote Hiab / Olsberg control battery. 2000mAh, 7.2V, NiMH Compatible battery for Hiab / Olsberg industrial remote control. Original Hiab CB crane control station battery.High quality spare parts that ensure optimal price-performance ratio.Reliable operation and full compatibility with your radio deviceCE and RoHs certificates -...
In stock
€63.00

Hiab XS drive 2000 mAh 7.2 V 14,4 W

GP212201
Crane remote Hiab / Olsberg control battery. 2000mAh, 7.2V, NiMH Compatible battery for Hiab / Olsberg industrial remote control. Original Hiab CB crane control station battery.High quality spare parts that ensure optimal price-performance ratio.Reliable operation and full compatibility with your radio deviceCE and RoHs certificates - meet all operational...
In stock
€24.90

VHBW Ni-Mh AA 14500 2000mAh

PER151SL
VHBW AA 2000mAh 1,2V Capacity: 2000 mAh Nominal voltage: 1,2V Diameter: 14±0.2mm Height: ≤ 50.5 mm Operating temperature: charging 0-45°C, discharging: -20-65°C Rechargeable: Yes Charge cycles: 400 Do not short-circuit or deeply discharge the batteries. Storage - charged. price for one battery.
In stock
€7.00

Akyga Li-polymer battery (654050) 1950 mAh 3.7 V

RLP654060
Li-on polymer battery cell.3,7 V / 1950mAh.Dimensions: 6,5mm / 40mm / 50mmAkyga Li-polymer battery 3.7 V – stable capacity 1950 mAh lithium polymer 654050 battery. Suitable for sensors and portable devices
In stock
€7.95

Heat Shrink Tubing 83 mm, Transparent, 2:1, 0.13 mm

PVC83
High-quality transparent heat shrink tubing designed for insulating and protecting wires, cables, battery packs and electronic components. The transparent material allows labels, markings or the protected surface to remain visible after shrinking. When heated with a hot air gun, the tubing shrinks evenly, fits tightly around the object and forms a rigid...
In stock
€1.10

1x 9 V Battery Holder with Switch and Wire Leads

W48171
Reliable Goobay battery holder designed for one 9 V block battery (6F22, 6HR61, 6LR61). The holder can be installed inside a battery-powered device or attached to its housing. The water-resistant black plastic housing provides additional protection against moisture and environmental influences. The battery is securely held in place, while reliable...
In stock
€1.00

PVC Heat Shrink Tubing (black) 139mm

PVC139J
- Inner diameter before contraction: about 139mm- Inner diameter after shrinkage: approx. 70mm- shrinkage ratio: approximately 2:1- Wall thickness: approximately 0.13mm- Color: black- Before shrinkage, the tubes are soft and moving- After shrinkage, the tube is stiff / hard- Shrinkage: With a hot air blower.Price one meter.
In stock
€2.50

PVC Heat Shrink Tubing (yellow) 115mm

PVC115G
- Inner diameter before contraction: about 115mm- Inner diameter after shrinkage: approx. 68mm- shrinkage ratio: approximately 2:1- Wall thickness: approximately 0.13mm- Color: yellow- Before shrinkage, the tubes are soft and moving- After shrinkage, the tube is stiff / hard- Shrinkage: With a hot air blower.Price one meter.
In stock
€1.50

PVC Heat Shrink Tubing (black) 83mm

PVC83J
- Inner diameter before contraction: about 83mm- Inner diameter after shrinkage: approx. 40mm- shrinkage ratio: approximately 2:1- Wall thickness: approximately 0.13mm- Color: black- Before shrinkage, the tubes are soft and moving- After shrinkage, the tube is stiff / hard- Shrinkage: With a hot air blower.Price one meter.
In stock
€1.10

PVC Heat Shrink Tubing not color 64mm

PVC64M
- Inner diameter before contraction: about 64 mm- Inner diameter after shrinkage: approx. 32 mm- shrinkage ratio: approximately 2:1- Wall thickness: approximately 0.13 mm- Color: not color- Before shrinkage, the tubes are soft and moving- After shrinkage, the tube is stiff / hard- Shrinkage: With a hot air blower.Price one meter.
In stock
€1.00

PVC Heat Shrink Tubing (red) 87mm

PVC87R
- Inner diameter before contraction: about 87mm- Inner diameter after shrinkage: approx. 40mm- shrinkage ratio: approximately 2:1- Wall thickness: approximately 0.13mm- Color: red- Before shrinkage, the tubes are soft and moving- After shrinkage, the tube is stiff / hard- Shrinkage: With a hot air blower.Price one meter.
In stock
€1.10

PVC Heat Shrink Tubing (white) 42mm

PVC42B
- Inner diameter before contraction: about 42 mm- Inner diameter after shrinkage: approx. 21 mm- shrinkage ratio: approximately 2:1- Wall thickness: approximately 0.13 mm- Color: yellow- Before shrinkage, the tubes are soft and moving- After shrinkage, the tube is stiff / hard- Shrinkage: With a hot air blower.Price one meter.
In stock
€0.60

PVC Heat Shrink Tubing (black) 16mm

PVC16J
- Inner diameter before contraction: about 16 mm- Inner diameter after shrinkage: approx. 8-9 mm- shrinkage ratio: approximately 2:1- Wall thickness: approximately 0.13 mm- Color: black- Before shrinkage, the tubes are soft and moving- After shrinkage, the tube is stiff / hard- Shrinkage: With a hot air blower.Price one meter.
In stock
€1.00

Fuse for battery pack 10A 72℃

TZDO72
Fuse Used in the production of Ni-mh Ni-cd Lithium battery blocks. Connected between cells. For temperature and current control. Current up to : 10Ah Temperature up to : 72℃
In stock
€0.85

Fuse for battery pack 3A/ 84℃

P03AF
Fuse Used in the production of Ni-mh Ni-cd Lithium battery blocks. Connected between cells. For temperature and current control. Current up to : 3Ah Temperature up to : 84℃
In stock
€0.80

Fuse for battery pack 10A/ 73℃

BF73
Fuse Used in the production of Ni-mh Ni-cd Lithium battery blocks. Connected between cells. For temperature and current control. Current up to : 10Ah Temperature up to : 73℃
In stock
€1.00

Fuse for battery pack 5A/ 84℃

P04AF
Fuse Used in the production of Ni-mh Ni-cd Lithium battery blocks. Connected between cells. For temperature and current control. Current up to : 5Ah Temperature up to : 84℃
In stock
€0.80

Fuse for battery pack 5A/ 84℃

A05AF
Fuse Used in the production of Ni-mh Ni-cd Lithium battery blocks. Connected between cells. For temperature and current control. Current up to : 5Ah Temperature up to : 84℃
In stock
€0.70

Textolite 0,5x80x140mm

8014047
Width: 80 mmLength: 140 mmThickness: 0.5mmColor: yellow Has excellent mechanical properties for izoliation inside battery pack. the materials used to protect the battery pack from dust and moisture. 
In stock
€1.70
Product added to wishlist
Product added to compare.

To ensure you have the best browsing experience, this website uses cookies. You can withdraw your consent at any time by changing your browser settings and deleting stored cookies.