Shopping Cart
There are no more items in your cart
Xcell lithium battery CR-P2
XCRP2
XCell CR-P2 (IEC 223) – 6 V lithium battery in a blister pack of 1. For devices that require a CR-P2 (223) size battery.
Technical data (manufacturer):Designation: CR-P2 / 223System: lithium (Li-MnO2)Nominal voltage: 6 VCapacity: 1500 mAhDimensions: 34.8 × 19.5 mmWeight: approx. 38 gPackaging: blister, 1 pc Ⓝ
In stock
€4.15
Duracell lithium battery CR1/3N-SLF
9001/3SN
Duracell CR1/3N-SLF (1/3N, DL1/3N) – 3 V lithium manganese dioxide (Li-MnO2) battery with welded tags for PCB soldering. Both tags have the same shape. Used for memory backup and in other electronics.
On request we can weld other tags, wires or wires with a connector instead. For additional services contact us. The battery sleeve colour may vary....
In stock
€5.99
Duracell 1/3N lithium battery 3V
9001/3P
Duracell 1/3N (DL1/3N, CR1/3N, 2L76, CR11108) – 3 V lithium manganese dioxide (Li-MnO2) cylindrical battery in a blister pack of 1. Used in LED lights, laser sights and pointers, dog training collars and keyless entry devices.
The voltage stays stable during most of the battery life, self-discharge is low – less than 1% per year when stored at +20 °C....
In stock
€5.65
XCell Flashlight Basic 1W with batteries
H137785
XCell Basic 1W – compact flashlight with a 1 W LED and metal body. Small and handy, ideal for the household. Supplied with batteries.
Sold individually, delivered in a display box of 12 pcs. Colours: red, white, dark green.
Technical data (manufacturer):Light source: 1 W LEDLuminous flux: 130 lmPower supply: AAA batteries (included)Body: metalLength: 115...
In stock
€5.00
XCell Rechargeable work light Worklight Dual
H150148
XCell Worklight Dual – rechargeable work light with magnetic base and Power Bank function. Powered by two protected 18650 lithium-ion batteries, 2000 mAh (included) or optionally by four AA batteries. Suitable for workshops, construction sites, camping and other indoor and outdoor work.
The base rotates 180° and has a magnet, hanging hook and tripod...
In stock
€38.80
FDK Ni-MH battery pack 2×AA 2.4V 1650mAh
AB2SAA1600
FDK Ni-MH battery pack 2.4 V – two industrial FDK HR-AAU (AA size, 1.2 V) rechargeable cells connected in series. Approx. 3 mm wide, 2–3 cm long solder tabs are welded to the positive and negative terminals. Cells made in Japan.
Low internal resistance of the cells keeps the voltage stable even at high discharge currents.
On request we can build a pack in...
In stock
€6.39
FDK battery HR-AAUC 1200mAh 1.2V
H138236
FDK HR-AAUC – AA size 1.2 V industrial nickel-metal hydride (Ni-MH) rechargeable cell with flat positive terminal, without tags, made in Japan. Designed for industrial battery packs, emergency power, measuring and other equipment.
On request we can weld tags or wires to the cell and match cells by internal resistance. For additional services contact us....
In stock
€3.00
FDK battery HR-AU 2700mAh 1.2V
HRASAN27
FDK HR-AU – A size 1.2 V industrial nickel-metal hydride (Ni-MH) rechargeable cell with flat positive terminal, without tags, made in Japan. Designed for industrial battery packs, emergency power, measuring and medical equipment.
Low internal resistance keeps the voltage stable even at high discharge currents.
On request we can weld tags or wires to the...
In stock
€5.00
FDK Ni-MH AAU 1650mAh Z contact
H110032/Zkontak
FDK HR-AAU – AA 1.2 V industrial nickel-metal hydride (Ni-MH) rechargeable cell with welded Z-type tags for connecting cells into battery packs or soldering. Made in Japan. Designed where many charge cycles and stable voltage under high load are needed: power tools, medical devices, industrial battery packs.
Low internal resistance keeps the voltage...
In stock
€3.20
FDK Ni-MH AAU 1650mAh 1.2 V
H110032
FDK HR-AAU – AA 1.2 V industrial nickel-metal hydride (Ni-MH) rechargeable cell without tags, made in Japan. Designed where many charge cycles and stable voltage under high load are needed: power tools, medical devices, industrial battery packs.
Low internal resistance keeps the voltage stable even at high discharge currents.
On request we can weld tags...
In stock
€3.10
FDK HR-4/3FAU Ni-MH 4500mAh 1.2 V
H106456
FDK HR-4/3FAU – 4/3FA 1.2 V industrial nickel-metal hydride (Ni-MH) rechargeable cell with flat positive terminal, without tags, made in Japan. Designed for industrial battery packs, emergency power, measuring and medical equipment.
Low internal resistance keeps the voltage stable even at high discharge currents.
On request we can weld tags or wires to...
In stock
€5.50
Tadiran lithium battery SL-886/P 3.6V
SL886/P
Tadiran SL-886/P – 1/6 D lithium thionyl chloride (Li-SOCl2) wafer cell with three pins (one +, two −) for PCB soldering. Designed for long-term CMOS memory and real-time clock backup.
This is a primary cell and must not be recharged. XOL series: very low self-discharge, hermetically sealed case with glass-to-metal seal.
Equivalents: TL-4935, TL-5135/P,...
In stock
€16.88
Tadiran lithium battery SL-889/P 3.6V
SL889/P
Tadiran SL-889/P – 1/10 D lithium thionyl chloride (Li-SOCl2) wafer cell with three pins (one +, two −) for PCB soldering. Designed for long-term CMOS memory and real-time clock backup.
This is a primary cell and must not be recharged. XOL series: very low self-discharge, hermetically sealed case with glass-to-metal seal.
Technical data...
In stock
€12.00
Scanreco 590,970 ... 7,2V 2Ah
RBS960BL
Device modelsScanreco 590Scanreco 592Scanreco 790Scanreco 960Scanreco RC400Scanreco RC590Scanreco RC960Replaces the following original accessoriesScanreco 13445Scanreco 16131Scanreco 17162Scanreco RSC7220Scanreco 16131Scanreco 17162Scanreco RSC7220
In stock
€39.90
Akyga Li-polymer battery (603048) 850 mAh 3.7 V
RLP603048
Akyga LP603048 – rechargeable lithium polymer (Li-Po) flat battery with a protection circuit module (PCM) and 150 mm wires with a JST SYP connector (2 pins, 2.54 mm pitch). Suitable for sensors and portable devices.
The protection board guards the battery against overcharge, over-discharge and short circuit. Charge it only with a Li-ion / Li-Po charger up...
In stock
€5.75
Akyga Li-polymer battery (421730) 175 mAh 3.7 V
RLP421730
Akyga LP421730 – rechargeable lithium polymer (Li-Po) flat battery with a protection circuit module (PCM) and 150 mm wires with a JST SYP connector (2 pins, 2.54 mm pitch). Suitable for sensors and small portable devices.
The protection board guards the battery against overcharge, over-discharge and short circuit. Charge it only with a Li-ion / Li-Po...
In stock
€4.05
Akyga Li-polymer battery (674261) 2000 mAh 3.7 V
RLP674261
Akyga LP674261 – rechargeable lithium polymer (Li-Po) flat battery with a protection circuit module (PCM) and 50 mm wires with a Molex 5264 connector (2 pins, 2.50 mm pitch). Suitable for portable devices.
The protection board guards the battery against overcharge, over-discharge and short circuit. Charge it only with a Li-ion / Li-Po charger up to 4.2...
In stock
€9.70
Akyga battery lithium CR2450 bulk
AK2450/1
Akyga CR2450 – primary lithium manganese dioxide (Li-MnO2) coin cell battery, 3 V. Suitable for watches, remote controls, scales and other electronic devices.
Bulk packaging – 25 pcs per tray. Convenient for supplying batteries with products you sell or for use at work.
Technical data (manufacturer):Nominal voltage: 3.0 VCapacity: 600 mAh (discharge...
In stock
€0.50
Akyga Lithium battery LIR1254
LIR1254
Akyga LIR1254 – rechargeable lithium-ion (Li-ion) button cell for wireless earbuds, smartwatches, fitness bands and other compact electronics.
This is not a disposable lithium battery – the cell may only be charged with a charger designed for Li-ion cells.
Technical data (manufacturer):Nominal voltage: 3.7 VCapacity: 75 mAhCharge current: standard 0.2C...
In stock
€2.20
Akyga BR2032 with solder tabs
ABR2032
Akyga BR2032 – 3 V lithium poly-carbon monofluoride (Li-CFx) coin cell with a plastic rim and two horizontal solder tabs for PCB mounting.
The wide operating temperature range (−40…+125 °C) makes it suitable for memory backup, clocks and sensors in devices that operate at high temperatures. The battery is not rechargeable.
Technical data...
In stock
€2.25
Akyga lithium BR2330 with solder tabs
BR2330ST2
Akyga BR2330 – lithium poly-carbon monofluoride (Li-CFx) button cell with two welded tabs for horizontal PCB soldering. Designed for long-term powering of low-drain devices: memory backup, RTC clocks, meters. Features very low self-discharge and a wide operating temperature range.
BR cells are intended for low currents only – not suitable for devices...
In stock
€1.95
Akyga LIR1240
LIR1240/1
Akyga LIR1240 – rechargeable lithium-ion (Li-ion) button cell without tabs. Fits a standard button cell holder.
This is not a primary lithium battery – charge it only with a Li-ion charger up to 4.2 V.
Technical data (manufacturer):Nominal voltage: 3.6 VCapacity: 50 mAh (0.2C discharge)Charge voltage: 4.2 V (CC/CV)Charge current: standard 0.2C (10 mA),...
In stock
€1.25
Akyga LIR1240 with solder tabs
LIR1240
Akyga LIR1240 – rechargeable lithium-ion (Li-ion) button cell with a plastic rim and two solder tabs for PCB mounting. The tabs are not visible in the photos.
This is not a primary lithium battery – charge it only with a Li-ion charger up to 4.2 V.
Technical data (manufacturer):Nominal voltage: 3.6 VCapacity: 50 mAh (0.2C discharge)Charge voltage: 4.2 V...
In stock
€1.50
Rayovac Extra 312 PR41
R312/8BLB
Rayovac Extra 312 – zinc-air batteries providing stable and reliable power for a wide range of hearing aids. Clear Sound technology helps maintain consistent performance and sound quality throughout the battery life. The batteries are dependable, long-lasting and suitable for everyday use.
Size: 312 (brown tab)Type: PR41 (zinc-air)Voltage: 1.45...
In stock
€2.15
0.269 € vnt