Shopping Cart
There are no more items in your cart
Battery pack Ni-Mh AA 3,6V 1800mAh (V)
AB3AA180V1
Ni-Mh battery pack AA 3.6V 1800mAh
Battery pack GP cells. With the wires. With red and black wire (length about 8cm)
The connection contacts are additionally insulated with capton tape. Coated with PCV (shell color may vary).
If necessary, we can montage off the wires connectors. Use cells of different capacity or dimensions for the package. For...
In stock
€10.20
Battery pack SubC 3,6V 2000mAh (V1)
ABSC18003
SubC 3,6V 2000mAh
Battery pack from Sub-C 1900mAh. with 15cm red&black the wires. Coated with PCV (shell color may vary).
If necessary, we can made thw wires with connectors. Use cells of different capacity or dimensions for the package. For additional services - contact us.
In stock
€6.50
Battery pack Ni-Mh AA 1800mAh 3,6V (H)
AB3AA180
Ni-Mh battery pack AA 3.6V 1800mAh Battery pack from GP cells. With the wires. With red and black wire (length about 8cm) The connection contacts are additionally insulated with capton tape. Coated with PCV (shell color may vary).If necessary, we can montage off the wires connectors. Use cells of different capacity or dimensions for the package. For...
In stock
€6.00
Ni-Mh Battery pack AAA 3,6V 700mAh
ABAAA3
GP- battery AAA 3,6V 700mAhNi-Mh battery pack with output wires length about 8cm. Coated with transparent PCV (shell color may vary).If necessary, we can weld the wires you need with terminals to the cell. Use cells of different capacity or dimensions for the package. For additional services - contact us.
In stock
€5.99
Ni-Mh Battery pack AAA 2,4V 700mAh
AB2SAAA700
GP-battery AAA 2.4V 800mAhNi-Mh battery pack with output wires length about 4cm. Coated with transparent PCV (shell color may vary).If necessary, we can weld the wires you need with terminals to the cell. Use cells of different capacity or dimensions for the package. For additional services - contact us.
In stock
€4.45
Akyga Li-polymer battery (903759) 2200 mAh 3.7 V
RLP903759
Li-on polymer battery cell.With PCM and connectors3,7 V / 2200mAh.Dimensions: 9mm / 37mm / 59mmAkyga Li-polymer battery (903759) 2200 mAh 3.7 VAkyga Li-polymer battery 3.7 V – stable capacity2200 mAh lithium polymer 903759 battery with protection circuit and connector. Suitable for sensors and portable devices
In stock
€7.00
Akyga Li-polymer battery (501220) 80 mAh 3.7 V
RLP501220
Li-on polymer battery cell.
With PCM and connectors
3,7 V / 80mAh.
Dimensions: 5mm / 12mm / 20mm
Akyga Li-polymer battery (501220) 80 mAh 3.7 V
Akyga Li-polymer battery 3.7 V – stable capacity
80 mAh lithium polymer 501220 battery with protection circuit and connector. Suitable for sensors and portable devices
In stock
€3.40
Akyga Li-polymer battery (603030) 470 mAh 3.7 V
RLP603030
Akyga LP603030 – rechargeable lithium polymer (Li-Po) flat battery with a protection circuit module (PCM) and 50 mm wires without a connector. Suitable for sensors and portable devices.
The protection board guards the battery against overcharge, over-discharge and short circuit. Charge it only with a Li-ion / Li-Po charger up to 4.2 V.
Production date:...
In stock
€4.45
Duracell battery CR1620
901620/B
Duracell CR1620 3V lithium battery offers reliable performance and long shelf life. Suitable for various household and electronic devices including watches, alarm remotes, sensors, toys, and other compact electronic equipment.
Duracell lithium batteries are designed to provide stable power output and dependable everyday performance....
In stock
€1.40
FDK Ni-MH AAU 1650mAh U contact
H110032/Ukontak
FDK HR-AAU – AA 1.2 V industrial nickel-metal hydride (Ni-MH) rechargeable cell with welded U-type tags for soldering. Made in Japan. Designed where many charge cycles and stable voltage under high load are needed: power tools, medical devices, industrial battery packs.
Low internal resistance keeps the voltage stable even at high discharge currents.
On...
In stock
€3.20
JST EH Connector with 5 Wires, 0.2 m (Black)
EHR5
JST EH type 5-pin female connector, EHR-5 housing, with factory-crimped wires. Used in battery packs as a balancing or monitoring connector – connects to BMS units, balance chargers and control boards with an EH header.
The 5-pin connector is suitable for balancing a 4S pack. Wire length approximately 200 mm (22 AWG); wire color may vary depending on the...
In stock
€0.77
JST EH Connector with 6 Wires, 0.2 m (Black)
EHR6
JST EH type 6-pin female connector, EHR-6 housing, with factory-crimped wires. Used in battery packs as a balancing or monitoring connector – connects to BMS units, balance chargers and control boards with an EH header.
The 6-pin connector is suitable for balancing a 5S pack. Wire length approximately 200 mm (22 AWG); wire color may vary depending on the...
In stock
€0.80
JST EH Connector with 10 Wires, 0.2 m (Black)
EHR10
JST EH type 10-pin female connector, EHR-10 housing, with factory-crimped wires. Used in battery packs as a balancing or monitoring connector – connects to BMS units, balance chargers and control boards with an EH header.
The 10-pin connector is suitable for balancing a 9S pack. Wire length approximately 200 mm (22 AWG); wire color may vary depending on...
In stock
€1.20
JST EH Connector with 8 Wires, 0.2 m (Black)
EHR8
JST EH type 8-pin female connector, EHR-8 housing, with factory-crimped wires. Used in battery packs as a balancing or monitoring connector – connects to BMS units, balance chargers and control boards with an EH header.
The 8-pin connector is suitable for balancing a 7S pack. Wire length approximately 200 mm (22 AWG); wire color may vary depending on the...
In stock
€1.00
JST EH Connector with 3 Wires, 0.2 m (Black)
EHR3
JST EH type 3-pin female connector, EHR-3 housing, with factory-crimped wires. Used in battery packs as a balancing or monitoring connector – connects to BMS units, balance chargers and control boards with an EH header.
The 3-pin connector is suitable for balancing a 2S pack. Wire length approximately 200 mm (22 AWG); wire color may vary depending on the...
In stock
€0.64
JST EH Connector with 2 Wires, 0.2 m (Black)
EHR2
JST EH type 2-pin female connector, EHR-2 housing, with factory-crimped wires. Used in battery packs as a balancing or monitoring connector – connects to BMS units, balance chargers and control boards with an EH header.
The 2-pin connector is used for power or single-cell monitoring circuits. Wire length approximately 200 mm (22 AWG); wire color may vary...
In stock
€0.60
JST EH Connector with 4 Wires, 0.2 m (Black)
EHR4
JST EH type 4-pin female connector, EHR-4 housing, with factory-crimped wires. Used in battery packs as a balancing or monitoring connector – connects to BMS units, balance chargers and control boards with an EH header.
The 4-pin connector is suitable for balancing a 3S pack. Wire length approximately 200 mm (22 AWG); wire color may vary depending on the...
In stock
€0.70
Connector JST EH 3 pin
EHR3/1
JST EH type 3-pin female connector, EHR-3 housing, with factory-crimped wires. Used in battery packs as a balancing or monitoring connector – connects to BMS units, balance chargers and control boards with an EH header.
The 3-pin connector is suitable for balancing a 2S pack. Wire length approximately 200 mm (22 AWG); wire color may vary depending on the...
In stock
€0.80
Connector JST EH 2pin
E206328
JST EH type 2-pin female connector, EHR-2 housing, with factory-crimped wires. Used in battery packs as a balancing or monitoring connector – connects to BMS units, balance chargers and control boards with an EH header.
The 2-pin connector is used for power or single-cell monitoring circuits. Wire length approximately 200 mm (22 AWG); wire color may vary...
In stock
€0.70
Connector JST XH 8 pin
AXHP8
JST XH type 8-pin female connector with factory-crimped wires, approximately 18 cm long. Used in battery packs as a balancing or monitoring connector – connects to BMS units, balance chargers and control boards with an XH header.
The 8-pin connector is suitable for balancing a 7S pack. Wire color may vary depending on the production batch. Price is for...
In stock
€1.00
Connector JST XH 6 pin
AXHP6
JST XH type 6-pin female connector with factory-crimped wires, approximately 18 cm long. Used in battery packs as a balancing or monitoring connector – connects to BMS units, balance chargers and control boards with an XH header.
The 6-pin connector is suitable for balancing a 5S pack. Wire color may vary depending on the production batch. Price is for...
In stock
€0.90
Connector JST XH 2 pin (male)
nnnn
JST XH type 2-pin male connector with factory-crimped wires, approximately 12 cm long. Mates with the JST XH 2-pin female connector – together they form a detachable wire connection between a battery and a device, charger or control board.
Used for power or single-cell monitoring circuits. Wire color may vary depending on the production batch. Price is...
In stock
€0.90
Connector JST XH 9 pin
AXHP-9
JST XH type 9-pin female connector with factory-crimped wires, approximately 18 cm long. Used in battery packs as a balancing or monitoring connector – connects to BMS units, balance chargers and control boards with an XH header.
The 9-pin connector is suitable for balancing a 8S pack. Wire color may vary depending on the production batch. Price is for...
In stock
€1.35