Accumulators

Murata US18650 VTC6 3150mAh with tabs

US18650VTC6/Z
Murata US18650VTC6 – an 18650 lithium-ion (INR) cell intended by the manufacturer for power tool battery packs and other high-current battery packs. The manufacturer's nominal capacity is 3150 mAh, minimum 3000 mAh (measured at 0.2C). At a 10 A discharge current the minimum capacity is 2700 mAh, and at 15 A – 2400 mAh. Maximum continuous discharge current...
In stock
€5.45

Murata US18650 VTC6 3150mAh 30A

US18650VTC6
Murata US18650VTC6 – an 18650 lithium-ion (INR) cell intended by the manufacturer for power tool battery packs and other high-current battery packs. The manufacturer's nominal capacity is 3150 mAh, minimum 3000 mAh (measured at 0.2C). At a 10 A discharge current the minimum capacity is 2700 mAh, and at 15 A – 2400 mAh. Maximum continuous discharge current...
In stock
€5.40

Murata US18650 VTC6 3150mAh 10 pcs

US18650VTC6/10
Murata US18650VTC6 – an 18650 lithium-ion (INR) cell intended by the manufacturer for power tool battery packs and other high-current battery packs. The manufacturer's nominal capacity is 3150 mAh, minimum 3000 mAh (measured at 0.2C). At a 10 A discharge current the minimum capacity is 2700 mAh, and at 15 A – 2400 mAh. Maximum continuous discharge current...
In stock
€44.15
4.415 € vnt

Keeppower Li-Ion battery 32700 7500mAh

KP32700
Keeppower 32700 – high-capacity lithium-ion rechargeable battery without protection electronics, capacity 7500 mAh. Price per piece. The battery is designed for equipment that requires higher power and long operating time. This 32700 size cell offers high energy capacity, stable voltage and a high permissible discharge current. Suitable for power tools,...
In stock
€10.80

Keeppower P1665C ICR16650 2100mAh

P1665C
Keeppower P1665C – 16650 size lithium-ion (ICR) rechargeable battery with protection electronics, capacity 2100 mAh. Price per piece. The 16 mm diameter is slightly smaller than 17 mm, so the Keeppower 16650 battery can be used instead of 17650 or 17670. It can also replace two 16340 or LIR123A batteries in many devices. BMS/PCM Seiko (made in Japan) with...
In stock
€9.00

Lithium battery ICR18500 2100mAh USB-C

ICR18500/USB
Lithium-ion battery ICR18500 3.7V 2100mAh dimensions: 18.4 x 55.5 mm, total set weight: 81.5 g, battery weight: 36.5 g, nominal voltage (average): 3.6V 3.7V, operating voltage (min./max.): 2.5–4.25 V, Charging: USB-C - 5V 600 mA, High capacity - max. 2100 mAh, min. 2000 mAh - according to IEC 61960-3 High current discharges (peak) up to 6.0 Ah are...
In stock
€9.00

Battery pack Li-ion 26650 3.6V 4500mAh

AB1S1P26650
26650 3.6V 4500mAhBattery pack from 26650 high discharge current cells. Special protection is installed inside.5Ah unloading and charging currents.The contacts are additionally insulated with capton tape.Coated with transparent PVC (shell color may vary). If necessary, we can weld the wires you need with terminals to the cell. Use cells of different...
In stock
€9.00

GP 17AAAH battery 1/3AAA, Ni-Mh

31/3AAA
GP 17AAAH GP battery 1/3AAA  GP 17AAAH-C1 industrial accumulator HR-1/3AAA Ni-Mh, Dimensions: 14.1 x10, 2 (HxØ / mm) We can weld the tags for you need to the cell. For service the cells are selected according to the internal resistance. If the connection requires the insulated cables to be routed. Please contact us for additional requirements.
In stock
€1.10

Varta NiMH 40mAh 1.2V battery with 2 pins

ABV40H1
Varta V40H – compact rechargeable Ni-MH button cell with two vertical pins for soldering to a printed circuit board (PCB). Designed for memory and real-time clock (RTC) backup in electronic boards, measuring instruments, alarm systems, controllers and other low-power equipment. Technical data (manufacturer):System: Ni-MHNominal voltage: 1.2 VCapacity: 40...
In stock
€3.00

Molicel INR21700 P45B 3,6V 4500mAh 45A

INR21700P45
Molicel INR21700P45B is a 21700-format Li-ion cell from the “Power Cell” series. Its low internal resistance makes it suitable for high-power battery packs. Upon request, we can weld the required terminals to the cells. Cells can also be matched according to internal resistance. Please contact us before ordering if insulated wires or other additional...
In stock
€5.80

HQ Vipow 6V 4.5Ah Sealed Lead Acid AGM Battery

H6V4,5AH
Maintenance-free sealed AGM (VRLA) lead-acid battery designed for standby and cyclic power applications. Suitable for backup power systems and a wide range of 6 V devices. Specifications Type: AGM (VRLA) sealed lead-acid battery Nominal voltage: 6 V Capacity: 4.5 Ah Maximum charging current: 1.35 A Standby charging voltage: 6.80–6.90 V Cycle charging...
In stock
€7.50

D R20 Ni-Cd 4500mAh 1.2V Industrial Rechargeable Battery

H136546
Industrial-grade D (R20) size nickel-cadmium rechargeable battery designed for applications requiring high discharge currents, long service life and reliable operation under demanding conditions. The battery offers excellent load handling and temperature resistance, making it suitable for emergency lighting systems, industrial equipment, medical devices,...
In stock
€6.40

Varta battery pack Ni-Mh 6V 150mAh

5/V150H
Varta 5/V150H – Ni-MH battery pack of five Varta V150H oval button cells connected in series in a vertical stack. The connection contacts are open, the pack is covered with transparent PVC sleeve (colour may vary). The manufacturer specification covers a single cell. Technical data:System: Ni-MHNominal voltage: 6 VCapacity: 150 mAhCells: 5 × Varta V150H...
In stock
€14.90

Varta microbattery Ni-Mh 40mAh

V40H
Varta Microbattery V40H – small rechargeable Ni-MH button cell for devices that need reliable rechargeable power in very limited space: miniature modules, medical equipment, low-current sensors, timers, headphones, toys. Ni-MH technology provides a high cycle count, overcharge resistance and stable operation at low currents. On request, we can weld the...
In stock
€2.10

Akyga Li‑polymer battery (613381) 2100 mAh 3.7 V

RLP613381
Li‑ion polymer battery cell. With PCM and connector. 3.7 V / 2100 mAh. Dimensions: 6.1 mm × 33 mm × 81 mm Li‑polymer battery 3.7 V – stable capacity 2100 mAh lithium polymer 613381 battery with protection circuit and connector. Suitable for sensors and portable devices.
In stock
€6.20

Akyga battery ML2020

AML2020
ML2020 is a rechargeable lithium manganese dioxide (Li‑MnO₂) button cell designed for long‑term, low‑drain applications that require limited recharge capability. Unlike standard CR lithium cells, ML batteries can be recharged, but their capacity and cycle life are significantly lower than those of conventional lithium‑ion cells. This makes the ML2020 a...
In stock
€1.10

GP battery HR4/3 450LAH Ni-Mh 4500mAh

GP450LAH
Battery GP 4500MAh  GP450LAH, GPRHC45LN021 Alternate Codes GP450LAH/T, GP450LAHHB Industrial. Without conclusions. We can add the conclusions as shown in the picture. Please indicate the width and length in the order. 
In stock
€4.95

Varta MEMPAC 2/V150H

2/V150H
Varta MEMPAC 2/V150H – rechargeable Ni-MH battery made of two series-connected V150H button cells, with 4 PCB solder pins. Designed for memory and clock backup power. The manufacturer specification covers a single cell; the pack consists of two cells. Technical data:System: Ni-MHNominal voltage: 2.4 VCapacity: 150 mAhDimensions: 42.4 × 17.0 × 16.0...
In stock
€8.50

Varta MEMPAC 4/V150HS

4/V150HSKSCT
Varta MEMPAC 4/V150H S – rechargeable Ni-MH battery made of four series-connected V150H button cells, with 3 PCB solder pins. Designed for memory and clock backup power. The manufacturer specification covers a single cell; the pack consists of four cells. Technical data:System: Ni-MHNominal voltage: 4.8 VCapacity: 150 mAhDimensions: 27 × 24 × 15 mmWeight:...
In stock
€10.00

Varta MEMPAC 3/V150H S-H

3/V150HMEMPA
Varta MEMPAC 3/V150H S-H – rechargeable Ni-MH battery made of three series-connected V150H button cells, with 4 PCB solder pins. Designed for memory and clock backup power. The manufacturer specification covers a single cell; the pack consists of three cells. Technical data:System: Ni-MHNominal voltage: 3.6 VCapacity: 150 mAhDimensions: 16 × 22 × 40...
In stock
€11.00

Varta 2/V150H rechargeable battery NiMH 2.4V 150mAh

2/V150H/1
Varta 2/V150H – rechargeable Ni-MH battery made of two series-connected V150H button cells, with 3 PCB solder pins: one positive pin and two negative pins 10 mm apart. Designed for memory backup power. Varta Ni-MH cells are sealed and use a GCE electrode, giving good overcharge capability and low self-discharge. They can be used in any position. Charging...
In stock
€7.75

Battery pack Varta Ni-Mh AA 3.6V 2100mAh / T

AB3SAA2100/T
Varta Ni-MH AA 3.6 V 2100 mAh battery pack – three Varta AA 2100 mAh cells connected in series in a triangle configuration. The cells are connected with a 3 mm wide strip, terminal length approx. 10 mm. The manufacturer specification covers a single cell. Technical data:System: Ni-MHNominal voltage: 3.6 VCapacity: 2100 mAhCells: 3 × AA (HR6), Varta...
In stock
€9.20

Battery pack Varta Ni-Mh AA 4.8V 2100mAh

AB4SAA2100
Varta Ni-MH AA 4.8 V 2100 mAh battery pack – four Varta AA 2100 mAh cells connected in series. Terminals 4 mm wide, approx. 5 mm long. Connections are additionally insulated with Kapton tape, the pack is covered with transparent PVC sleeve (colour may vary). The manufacturer specification covers a single cell. Technical data:System: Ni-MHNominal voltage:...
In stock
€9.50

Battery pack Varta Ni-Mh AA 3.6V 2100mAh

AB3SAA2100
Varta Ni-MH AA 3.6 V 2100 mAh battery pack – three Varta AA 2100 mAh cells connected in series. The cells are connected with a 3 mm wide strip, terminal length approx. 5 mm. Connections are additionally insulated with Kapton tape, the pack is covered with transparent PVC sleeve (colour may vary). The manufacturer specification covers a single cell....
In stock
€8.90

Varta Ni-Mh 3,6V 40mAh

ABV40H3
Varta 3/V40H – rechargeable Ni-MH battery made of three series-connected V40H button cells, with solder tabs. Designed for memory and clock backup power. The manufacturer specification covers a single cell; the pack consists of three cells. Technical data:System: Ni-MHNominal voltage: 3.6 VCapacity: 40 mAhDimensions: Ø 12.6 × 16.9 mmTerminals: solder tabs Ⓝ
In stock
€6.70

Varta Accu Power AA 2100mAh /10 pcs

256706/10
Varta Recharge Accu Power AA 2100 mAh – rechargeable Ni-MH batteries for everyday devices, from low-drain to high-drain. Supplied pre-charged (Ready To Use), with very low self-discharge – approx. 75 % capacity remains after 12 months. Paper box of 10 pieces. Price is per box. Technical data (manufacturer):System: Ni-MHSize: AA (HR6)Nominal voltage: 1.2...
In stock
€19.50
1.950 € vnt

Varta microbattery V150H

V150H
Varta V150H – industrial rechargeable Ni-MH button cell for backup power and portable electronics. On request, we can weld the required tabs to the cell, match cells by internal resistance and add insulated lead wires. For additional services, contact us. Technical data (manufacturer):Type: 55615Nominal voltage: 1.2 VTypical capacity: 150 mAhDimensions:...
In stock
€2.40

FDK HR-4/3FAU Ni-MH 4500mAh 1.2 V

H106456
FDK HR-4/3FAU – 4/3FA 1.2 V industrial nickel-metal hydride (Ni-MH) rechargeable cell with flat positive terminal, without tags, made in Japan. Designed for industrial battery packs, emergency power, measuring and medical equipment. Low internal resistance keeps the voltage stable even at high discharge currents. On request we can weld tags or wires to...
In stock
€5.50

Q-Batteries AGM battery 6LS-4,5Ah 6V

6LS45
Q-Batteries 6LS-4.5 6V 4.5Ah lead AGM battery Quality-Batteries are AGM rechargeable batteries (Lead-Fleece Technology Usage - Safety technology - Fire alarms. - Alarm technology - Industry - Telecommunications - UPS systems   AGM Connector: F1 (4.8mm) Capacity: 4.5 Ah Voltage: 6 Weight: 0.7 Dimensions: 70 x 47 x 106 mm
In stock
€5.50

Multipower MP4.5-4 4V 4.5Ah 18Wh AGM Battery

MP45/4
The Multipower MP4.5-4 is a sealed, valve-regulated AGM lead-acid battery. Its electrolyte is absorbed in a glass-fibre separator, eliminating the need for routine maintenance. Suitable for electronic scales, security systems, emergency lighting, medical equipment and other 4 V standby applications. Before replacement, compare the case dimensions,...
In stock
€14.00

Xtreme AGM battery 4 V 4,5 Ah

E4V4.5
Voltage: 4VCapacity: 4.5 AhService life: approx. 4 yearsCharging (+25 C):Cyclic Duty: 7.2-7.5V (-15mV/C), Max Current: 0.39AContinuous use: 6.8-6.9V (-10mV/C)Dimensions and weight:Height: 107 mmWidth: 46 mmLength: 46mmWeight: 0.486 kg
In stock
€8.00

Multipower AGM MP4.5-12 12V 4,5Ah

ALMW5-12L
Multipower MP4.5‑12 – AGM battery 12 V 4.5 Ah The Multipower MP4.5‑12 is a sealed AGM lead‑acid battery designed for both standby and cyclic applications. Its stable performance and reliable construction make it suitable for alarm systems, UPS units, emergency lighting, medical devices, measuring equipment and various electronics projects. The battery...
In stock
€13.90

Akyga Li‑polymer battery (123497) 4500 mAh 3.7 V

RLP123497
Li‑ion polymer battery cell. With PCM and connector. 3.7 V / 4500 mAh. Dimensions: 12 mm × 34 mm × 97 mm Akyga Li‑polymer battery 3.7 V – stable capacity 4500 mAh lithium polymer 123497 battery with protection circuit and connector. Suitable for portable devices, energy storage modules and electronics projects.
In stock
€8.80

Akyga Li-polymer battery (351120) 40 mAh 3.7 V

RLP351120
Li-polimer (351120) 40mAh Akyga Li-polymer battery (351120) 40 mAh 3.7 VAkyga Li-polymer battery 3.7 V – with PCM protectionCompact lithium polymer 40 mAh battery with PCM protection and connector lead. Reliable solution for devices
In stock
€3.60

Li-polimer (401230) 110mAh

RLP401230
Akyga Li-polimer (401230) 110mAh Suitable for:    Robotics and remote controlled divices    Automotive equipmen    Medical devices    Measuring devices    Power supply    Consumer electronics    GPS System    Communication Made data 2024.04
In stock
€3.20
Product added to wishlist
Product added to compare.

To ensure you have the best browsing experience, this website uses cookies. You can withdraw your consent at any time by changing your browser settings and deleting stored cookies.