Shopping Cart
There are no more items in your cart
Melasta Ni-Mh AA 2000mAh 1,2V / Z welding tag
AA2000/Z
Industrial battery.
With two Z type welding tag.
3mm/15mm
Ni-MH industrial battery. AA / R6 Size. 2000mAh capacity 1.2Volts
In stock
€1.60
Battery Ni-Mh AA 2000mAh 1,2V / 3P
AA2000/3P
AA Industrial battery.
Plus one tag, is one soldering point.Minus two soldering points. Pin spacing: 10mm
Ni-MH industrial battery. AA / R6 Size. 2000mAh capacity 1.2Volts
In stock
€2.50
Battery Ni-Mh AA 2000mAh 1,2V / P welding tag
AA2000/P
Industrial battery.
With two P type welding tag.
3mm/15mm
Ni-MH industrial battery. AA / R6 Size. 2000mAh capacity 1.2Volts
In stock
€1.60
HQ Vipow 6V 4.5Ah Sealed Lead Acid AGM Battery
H6V4,5AH
Maintenance-free sealed AGM (VRLA) lead-acid battery designed for standby and cyclic power applications. Suitable for backup power systems and a wide range of 6 V devices.
Specifications
Type: AGM (VRLA) sealed lead-acid battery
Nominal voltage: 6 V
Capacity: 4.5 Ah
Maximum charging current: 1.35 A
Standby charging voltage: 6.80–6.90 V
Cycle charging...
In stock
€7.50
Xcell LIR16340 1000mah 3,7 V
LIR16340/1
The LIR16340 battery can replace the following rechargeable batteries or accumulators: CR123 A, CR123 R, R-CR123, CR17335, CR17345, DL123A, EL123AP, K123LA, L123A, ARB-L16-700 ...The rechargeable battery is a very good replacement for their batteries, because by charging it up to 500 times, it saves the environment and your money.Used: flashlights, LED...
In stock
€5.00
Keeppower LI-26500 3200 mAh 3,7 V
LI26500
LI -26500
Capacity 3200 mAhMin. capacity - 3100 mAhNominal voltage: 3.6V / 3.7VCharging end voltage: 4.2V ± 0.05VFinal discharge voltage: 2.5VStandard charging current 0.xx - 2A (2000mA)Max. Charging current 1C 3.2A (3200mA)Positive Pole: Flat, slightly protruding.Max. Discharge current (pulse about 5 seconds): 10AMax. Discharge current (continuous load):...
In stock
€8.70
Akyga Li-polymer battery (501220) 80 mAh 3.7 V
RLP501220
Li-on polymer battery cell.
With PCM and connectors
3,7 V / 80mAh.
Dimensions: 5mm / 12mm / 20mm
Akyga Li-polymer battery (501220) 80 mAh 3.7 V
Akyga Li-polymer battery 3.7 V – stable capacity
80 mAh lithium polymer 501220 battery with protection circuit and connector. Suitable for sensors and portable devices
In stock
€3.40
Multipower AGM MP4.5-12 12V 4,5Ah
ALMW5-12L
Multipower MP4.5‑12 – AGM battery 12 V 4.5 Ah
The Multipower MP4.5‑12 is a sealed AGM lead‑acid battery designed for both standby and cyclic applications. Its stable performance and reliable construction make it suitable for alarm systems, UPS units, emergency lighting, medical devices, measuring equipment and various electronics projects.
The battery...
In stock
€13.90
Akyga Li‑polymer battery (8970129) 10 000 mAh 3.7 V
RLP8970129
Li‑ion polymer battery cell.
With PCM and connector.
3.7 V / 10 000 mAh.
Dimensions: 8.9 mm × 70 mm × 129 mm
Akyga Li‑polymer battery 3.7 V – stable capacity
10 000 mAh lithium polymer 8970129 battery with protection circuit and connector. Suitable for high‑capacity portable devices, energy storage modules and electronics projects.
In stock
€20.20
Battery pack Ni-Mh 3,6V 80mAh
3/V80H
System: Ni-MH Voltage: 3,6 volts mAh: 80 mAh
15,5/19 mm Weight: 14 g Plug-in system: LF-Z
3.6 V 80 mAh Ni‑MH battery pack is a compact three‑cell rechargeable power source designed for low‑drain electronics. It features solder tabs for easy installation on PCBs or direct replacement in devices that use custom battery packs.
Ni‑MH chemistry provides...
In stock
€1.50
Contact welding
