Shopping Cart
There are no more items in your cart
Akyga battery ML2020
AML2020
ML2020 is a rechargeable lithium manganese dioxide (Li‑MnO₂) button cell designed for long‑term, low‑drain applications that require limited recharge capability. Unlike standard CR lithium cells, ML batteries can be recharged, but their capacity and cycle life are significantly lower than those of conventional lithium‑ion cells. This makes the ML2020 a...
In stock
€1.10
Keeppower P1450i Li-ion 1,5 V AA 3600 mWh
X1450/24
For the stable and high output voltage, the 1.5 V Li-ion batteries are compatible with all devices that are designed to work with disposable batteries and where the low voltage of the NiMH battery (1.2-1.35 V) causes problems. High voltage results in higher performance of many devices, for example flashlights or bulbs shine brighter or motors (toys,...
In stock
€2.85
Keeppower P1450i2 Li-ion 1,5 V AA 4300 mWh
X14500/28
For the stable and high output voltage, the 1.5 V Li-ion batteries are compatible with all devices that are designed to work with disposable batteries and where the low voltage of the NiMH battery (1.2-1.35 V) causes problems. High voltage results in higher performance of many devices, for example flashlights or bulbs shine brighter or motors (toys,...
In stock
€4.10
Keeppower P1044C 10440 AAA 570mAh
ICR10440
Keeppower 10440 P1044C is a high-quality protected lithium-ion rechargeable battery with integrated PCB/BMS protection circuit. The 10440 size corresponds to a standard AAA battery format and is commonly used in compact electronic devices where low weight and small dimensions are important.
The built-in protection circuit helps protect the battery against...
In stock
€6.90
Keepower P2680C battery ICR26800 7000mah
P2680C
P2680C
Keeppower 26800 7000mAh Rechargeable Li-ion Battery P2680C
Manufacturer: Keeppower
Size: (H) 83.80 mm * (W) 26.50 mm (±0.2 mm)
Manufacturer code: P2680C
Weight: 116 g
Protected 26800 Li-ion Rechargeable Battery P2680C
Minimum capacity: 6900 mAh
Typical capacity: 7000 mAh
Voltage: 3.6 V
Quality rechargeable Li-ion battery made in China.
With...
In stock
€14.90
Akyga Li-polimer (303040) 320 mAh 3,7 V
RLP303040
i-on polymer battery cell.With PCM and connectors3,7 V / 320mAh.Dimensions: 5mm / 34mm / 48mmAkyga Li-polymer battery (303040) 320 mAh 3.7 VAkyga Li-polymer battery 3.7 V – stable capacity800 mAh lithium polymer 303040 battery with protection circuit and connector. Suitable for sensors and portable devices
In stock
€2.90
Akyga Li-polymer battery (501220) 80 mAh 3.7 V
RLP501220
Li-on polymer battery cell.
With PCM and connectors
3,7 V / 80mAh.
Dimensions: 5mm / 12mm / 20mm
Akyga Li-polymer battery (501220) 80 mAh 3.7 V
Akyga Li-polymer battery 3.7 V – stable capacity
80 mAh lithium polymer 501220 battery with protection circuit and connector. Suitable for sensors and portable devices
In stock
€3.40
Keeppower P2652U battery ICR26650 5200mah
P26502U
P2652U
Protected 26650 Li-ion rechargeable battery
Nominal capacity: 5200 mAh 3.6V
Standard continuous charging current: 1.0A (via USB), 2A (using Li-ion battery charger)
Maximum continuous discharge current: 8.0A
Protection circuit (against overload, over discharge, over current and short circuit).
Charging voltage via USB: 5V
More than 500...
In stock
€13.00
Li‑polymer battery (475085) 2500 mAh 3.7 V
RLP475085
Li‑ion polymer battery cell.
With PCM and connector.
3.7 V / 2500 mAh.
Dimensions: 4.7 mm × 50 mm × 85 mm
Li‑polymer battery 3.7 V – stable capacity
2500 mAh lithium polymer 475085 battery with protection circuit and connector. Suitable for sensors and portable devices.
In stock
€9.55
Battery pack Ni-Mh 3,6V 80mAh
3/V80H
System: Ni-MH Voltage: 3,6 volts mAh: 80 mAh
15,5/19 mm Weight: 14 g Plug-in system: LF-Z
3.6 V 80 mAh Ni‑MH battery pack is a compact three‑cell rechargeable power source designed for low‑drain electronics. It features solder tabs for easy installation on PCBs or direct replacement in devices that use custom battery packs.
Ni‑MH chemistry provides...
In stock
€1.50
Contact welding
