Accumulators

FDK Ni-MH battery pack 2×AA 2.4V 1650mAh

AB2SAA1600
FDK Ni-MH battery pack 2.4 V – two industrial FDK HR-AAU (AA size, 1.2 V) rechargeable cells connected in series. Approx. 3 mm wide, 2–3 cm long solder tabs are welded to the positive and negative terminals. Cells made in Japan. Low internal resistance of the cells keeps the voltage stable even at high discharge currents. On request we can build a pack in...
In stock
€6.39

Akyga Li-polymer battery (903450) 1600 mAh 3.7 V

RLP903450
Akyga LP903450 – rechargeable lithium polymer (Li-Po) flat battery with a protection circuit module (PCM) and 150 mm wires with a JST SYP connector (2 pins, 2.54 mm pitch). Suitable for sensors and portable devices. The protection board guards the battery against overcharge, over-discharge and short circuit. Charge it only with a Li-ion / Li-Po charger up...
In stock
€6.00

Akyga Li-polymer battery (573450) 980 mAh 3.7 V

RLP573450
Li-on polymer battery cell.With PCM and connectors3,7 V / 980mAh.Dimensions: 5,7mm / 34mm / 50mmAkyga Li-polymer battery (573450) 980 mAh 3.7 VAkyga Li-polymer battery 3.7 V – stable capacity980 mAh lithium polymer 573450 battery with protection circuit and connector. Suitable for sensors and portable devices
In stock
€3.70

Akyga Li-polymer battery (603450) 1200 mAh 3.7 V

RLP603450
Akyga battery 603450 Lithium polymer battery with PCM and connector. Li‑polymer cell is manufactured according to the 603450 dimensional standard and is intended for compact electronic devices that require a stable 3.7 V supply and increased energy capacity. The cell features a flat rectangular construction with a soft aluminum pouch, allowing easy...
In stock
€3.95

Panasonic Li-ion NCA103450 2270 mAh

NCA103450
Panasonic Li-ion NCA103450 2270 mAh Voltage: 3.7V Capacity: 2270 mAh Charging current: Standard: 1000mA; fast: 1700mA max discharge peak current: 4500mA Dimensions: Thickness: 10.4mm Width: 33.9mm Height: 48.7mm Weight: 42g Can be mounted in any configuration packages with protective PCB layouts only. These Li-ion cells are supplied without the required...
In stock
€10.30

Akyga Li-polymer battery (403450) 750 mAh 3.7 V

RLP403450
Li-on polymer battery cell.With PCM and connectors3,7 V / 750mAh.Dimensions: 4mm / 34mm / 50mm Akyga Li-polymer battery (403450) 750 mAh 3.7 VAkyga Li-polymer battery 3.7 V – stable capacity750 mAh lithium polymer battery with protection circuit and connector. Suitable for sensors and portable devices
In stock
€3.30
Akyga Li-polymer battery 3.7 V – stable capacity
  • On sale!

Akyga Li-polymer battery (443450) 750 mAh 3.7 V

RLP443450
Li-on polymer battery cell.With PSM and connectors3,7 V / 750mAh.Dimensions: 4,4mm / 34mm / 50mm Akyga Li-polymer battery (443450) 750 mAh 3.7 V Akyga Li-polymer battery 3.7 V – stable capacity750 mAh lithium polymer battery with protection circuit and connector. Suitable for sensors and portable devices
In stock
€4.00

Samsung Li-ion ICP103450S 2000mAh

ICP103450
SAMSUNG battery ICP103450S Li-ion Voltage: 3.7V Capacity: 2000 mAh Charging current: Standard: 1000mA; fast: 1700mA max discharge current: 2000mA Dimensions: Thickness: 10.4mm Width: 33.9mm Height: 48.7mm Weight: 42g Can be mounted in any configuration packages with protective PCB layouts only. These Li-ion cells are supplied without the required PCM/BMS...
In stock
€11.30

Li-polimer (803450) 1500mAh 3,7V

RLP803450
Li-pol (803450) 1500mAh Suitable for:     Robotics and remote controlled divices     Automotive equipmen     Medical devices     Measuring devices     Power supply     Consumer electronics     GPS System     Communication
In stock
€5.50
Product added to wishlist
Product added to compare.

To ensure you have the best browsing experience, this website uses cookies. You can withdraw your consent at any time by changing your browser settings and deleting stored cookies.