Shopping Cart
There are no more items in your cart
Charger XTAR SC1
SC1
Xtar charger for lithium batteries with LED.Very economical and small.Wide range of applications from 10440 to 26650 batteries.Discharge technology allows batteries to be recharged at lower voltages.Micro-USB powered, charge on the go. USB cable included.
In stock
€5.50
Charger for Makita 14,4V - 18 V 1 Ah
MAK1418
Charger for Makita 14.4V -18V for tool batteries.
Rechargeable 5S packs. Also Makita or Linder, Columbia power tool batteries.
Technical data:
Power supply: 100 - 240 Volts
Model: portable charger
LED charging indication
Reverse polarity protection
Rechargeable chemistry: Lithium
Maximum charging current: 1000 mA
Charging voltage up to: (21V)
Weight:...
In stock
€35.00
Xtar 12V power supply 2 Ah
XT1220
Voltage: 220VOutput: 12 V (12 volts) 2000 mA ( 2 ampere)Output power: 24 W (24 watts)Plug dimensions: 5.5 mm x 2.1 mmColor: blackCertifications: UL, cUL, CCC, CE, CB, GS, FCC, UL, EK, SAA, CSA, PSEPolarity:(+) Positive pole: inside( - ) Negative pole: outside
In stock
€7.30
Li-ion Charger 2S cells 8,4V 4A
NV-LBC-2C4A
Li-ion battery Charger
2 cells li-ion charger 8.4V Charge current 2Ah
In stock
€23.90
Charger XTAR MX4
MX4
Compact four-slot charger with wide charging compatibility.Compatible with 1.5V and 3.6/3.7V Li-ion; 3.2V LiFePO4 and 1.2V Ni-MH batteries.
A mechanical slide switch with 2 selections on the side (standard & LifePO4) switches to the desired battery type. Four LEDs provide information on the charging process. Charging stops automatically when the...
In stock
€9.50
Car adapter 12V to 12V
M126/1
Car adapter (connects to the cigarette lighter).The connector is a standard round plug. 5.5 mm is the outer diameter, and 2.1 mm is the inner hole diameter. This is the most popular size for most devices.Input voltage from the car socket (12V).Output power: is 12 volts and 2 amperes (2000mA). This is a powerful enough adapter that can power not only...
In stock
€3.00
Akyga 9V power supply 1000 mAh
AKPD32
Supply voltage 100-240 VPower consumption < 0.6 AOutput voltage 9 VOutput amperage 1 AMaximum power 9 WPower supply connector 5.5 x 1.4 mmPin Length 12 mmCable length 1.5 mMechanical switch NoneGround wire None (II protection class)Material ABSProduct color BlackTemperature 5 - 50 °CPackage EcoBoxProduct size (L x W x H) 80 x 57 x 30 mmPackage size (L...
In stock
€6.95
EMOS AC/DC voltage converter N3110 0.6Ah
N3110
Output current: max. 600 mAOutput voltage: 3 V, 4.5 V, 5 V, 6 V, 7.5 V, 9 V, 12 VCable: 1.5 mOverload, overvoltage and short circuit protectionLED indication
In stock
€12.50
Power supply DC-DC from 2,7 V to 24 V 30 W
VHX0016A
Voltage converter to 24 Volts
DC voltage converter. Input from 2.7V to 5.5V (this is the voltage of one or two batteries) can increase from 3.5V to 24V. Voltage, using devices, is set with the help of a potentiometer. The load cannot exceed 30W.
In stock
€5.90
Varta charger 57676 LCD Li-ion Ni-Mh
257676
Varta NiMH charger
4 modes (Charge, discharge, refresh, test) NiMH charger. With temparature control, short circut and wrong polarity protection. USB out port. LCD screen.
Compatible with Ni-MH: AA and AAA
Compatible with Li-Ion: 18650, 18490, 18350, 17670, 17500, RCR123A/
17335/ 16340, 14500, 10440*
In stock
€48.00
Charger for Palfinger Scanreco Ni-Mh 7.2V
RBS950BE
The Charger for Palfinger Scanreco Ni-Mh 7.2V 600mAh
Charger for your baterijų paketų Palfinger 592, 1026, 13445, 16131, 17162, 708031757, EEA4404, IM6024, RSC7220 / Scanreco 13445, 592, 1026, 16131, 17162, 708031757, IM6024, RSC7220, EEA4404
Dimension: 116 x 71 x 32 mm
In stock
€29.50
Charger for Makita Ni-Nh/Ni-Cd 1,2V-18V
H141887
XCell charger for Makita 1.2-18VNi-Cd/Ni-MH tool batteriesRechargeable battery packs from 1.2V to 18.0V.Can be used to charge packs from other manufacturers.Technical data:Power supply: 100 - 240 VoltsModel: Desktop chargerLED charging indicationReverse polarity protectionRechargeable batteries: 1-15 cellsRechargeable chemistry: Ni-Cd, Ni-MhMaximum...
In stock
€30.90
Contact welding
